The 110/216-Series toggle switches feature a quick-make, quick-break contact mechanism. They are suitable for AC/DC shallow back panel applications and fit the industry standard 0.500 diameter mounting hole.

The N-Series Addressable Switch offers the look and feel of a traditional electro-mechanical control coupled with a built in PCB to provide customers with a flexible, cost effective alternative to a CAN/LIN based switch. The N-Series produces up to 144 individual switch IDs by using a resistive ladder circuit. Different switch IDs are achieved by changing the resistor values tied to individual loads.

Carling Technologies set the standard for performance and aesthetics with the widely successful, often imitated but never duplicated, V-Series rocker switches. Building further upon that platform, Carling has once again raised the bar with the fully sealed W-Series. The W-Series’ traditional appearance features complete IP68 protection, even below the panel, where the critical connection is made from your wiring harness.

The Illuminated Plug offers an additional design option for the modular and flexible V-Series Contura system. It is offered with removable/replaceable lamps, Contura styling, and LED illumination with your choice of one or two lenses. Using the same cutout as the Contura line of rocker switches, the V-Series Illuminated Plug also has a unique panel retention system which accommodates panel thicknesses up to 1/2'.

The V-Series Contura X, XI & XII snap-in rocker/paddle switches offer countless unique options including choices for ratings, circuits, colours, illuminations and and symbols. These single or double pole switches feature removable actuators in a choice of actuator styles and colours, and can be illuminated with either square or bar shaped lenses. Actuators and square lenses may also be purchased and stocked separately from the base assembly.

Carling Technologies’ Contura VI sealed rocker switches offer the perfect complement to the already popular Contura line of sealed V-Series rocker switches. Used in a row, they create an uniquely appealing design on your panel. The Contura product offers endless possibilities for your product development, always offering creative, dynamic, yet economical, alternatives in dash panel design.

The V-Series Contura IV, V, & VII snap-in rocker switches offer countless unique options including choices for ratings, circuits, colours, illuminations and symbols. These single or double pole switches feature removable actuators in a choice of actuator styles and colours, and can be illuminated with either oval or bar shaped lenses. Actuators may also be purchased and stocked separately. An optional plug-in terminal connector enables pre-wi...

The V-Series Contura II & III snap-in rocker switches offer countless unique options including choices for ratings, circuits, colours, illuminations and symbols. These single or double pole switches feature removable actuators in a choice of actuator styles and colours and can be illuminated with either square or bar shaped lenses. Actuators may be purchased and stocked separately.

The LP-Series Illuminated Indicators are the perfect complement to the aesthetics, reliability, and performance of our L-Series rocker switches. As a critical safety feature, the illumination alerts the operator of essential system functions or malfunctions, such as: oil pressure, high temperature, transmission or other fluid levels, parking brake, or general system confirmations.

S-Series rocker switches are designed for use in the enclosed cabs of today’s trucks, with special focus afforded to the vehicle operator. With features including abbreviated travel ½ throw actuators, ergonomic rockers, illumination in up to three detent switch positions, and a non-teasable snap action circuit, these switches provide the driver with easily recognisable and simple to operate controls. 

The LTIL-Series are single pole illuminated rocker switches which are available with nylon snap-in or screw type mounting brackets. These switches are AC rated and also suitable for low voltage DC applications. Options include a wide range of single or double throw momentary and maintained circuits, as well as a variety of rocker colours and styles, lens colours, lamp voltages, and terminations.

The LTIH-Series are triple pole illuminated rocker switches available with steel snap-in or screw type mounting brackets.

The L-Series snap-in rocker switches offer countless unique options including choices for ratings, colours, illuminations and laser etched legends. These single or double pole switches feature a broad choice of actuator styles, colours, and lenses. Neatly proportioned, the L-Series rocker switch fits into industry standard mounting holes of 1/734' x 0.867 & and 44.0x22.0mm.

The LTIG-Series are double pole illuminated rocker switches which are available with nylon snap-in or screw type mounting brackets. These switches are AC rated and also suitable for low voltage DC applications. Options include a wide range of single or double throw momentary and maintained circuits, as well as a variety of rocker colours and styles, lens colours, lamp voltages, and terminations.

The LS-Series Softspot illuminated rocker switches feature a three-colour high brightness light sequence from a single lamp. These single pole switches are designed with a standard nylon snap-in bracket and 'Drip-Dry' construction that protects the front panel from dust and moisture.

The A-Series hydraulic-magnetic circuit breakers are compact, temperature stable and designed for precision operation in OEM markets requiring general purpose as well as full load amp applications. It includes 1-6 poles; ratings from 0.02 to 50amps, up to 277VAC or 80VDC; UL Recognized, UL Listed, UL1500, UL1077, TUV, VDE & CSA.

Providing maximum and dependable circuit protection, Carling Technologies has announced the H-series hydraulic-magnetic circuit breaker which offers a cost-effective, compact solution. Meeting the IEC spacing requirements, the H-series is suited for international market applications including telecomms, datacomms and marine.

The G-series hydraulic-magnetic circuit breaker ensures maximum protection by integrating wiping contacts for longevity, a common trip linkage between poles, a unique terminal bus connection system and optional integrated auxiliary contacts. It is also suitable for reverse feed and provides finger safe terminals.

Designed and tested to operate in harsh environments, the MS-series sealed toggle circuit breaker from Carling Technologies is suited for COTS military applications. The space saving envelope meets IP68 requirements and features a durable metal and sealed mounting bushing with MIL-PRF-39019F ingress protection when mounted in a panel.

Carling Technologies has announced the availability of its high-performance N-Series hydraulic-magnetic circuit breaker, suited for the rigours and confined spaces of telecomms and datacomms PDUs (Power Distribution Units) and rack systems. Its low profile design features easily accessible load and line terminals and sliding barriers for effortless installation.