PWM controller IC for non-isolated DC/DC POLs

17th April 2014
Source: ZMDI
Posted By : Nat Bowers
PWM controller IC for non-isolated DC/DC POLs

ZMDI announces a fully configurable true-digital, high-performance PWM controller IC for non-isolated, step-down DC/DC point-of-load (POL) supplies. The ZSPM1005 operates in a single-phase and single-rail configuration. ZMDI is following its roadmap for smart power management by adding another ZSPM IC family member targeted for FPGA designs and POL power modules for single-phase applications including telecommunication, base stations, servers and storage.

ZMDI customers are already familiar with the advantages of the ZSPM1000 true-digital PWM controller solution. Like the ZSPM1000, the ZSPM1005 has a digital control loop and is fully programmable, enabling fast design-cycles and easy debugging. For both products, ZMDI’s patented, digital control engine results in best-in-class step-response performance resulting in the highest power density and best POL solution cost.

The ZMDI controller provides a 2-pin-configuration feature to set output voltage, compensation, and other parameters using external resistors. The pin assignments are fully programmable by the Pink Power Designer software during development. In the final application, the ZSPM1005 controller device has the flexibility to configure a curve fitting relationship between the voltage at the configuration pin and parameters such as output voltage set-point, so digital communication with the DC/DC converter for monitoring or on-the-fly configuration is not required. Since this “hybrid” IC is pin-to-pin compatible with the ZSPM1000, ZMDI’s family concept enables POL power module platform designs for modules with and without digital PMBus communication.

“We call the new ZSPM family member a 'hybrid' controller because it delivers the performance and flexibility of the digital world, while in the final application, it is used like a traditional analog-controller-based POL solution. It combines the best of both worlds,” said Tycho Raab, Product Line Manager at ZMDI. “Due to the simplicity of use and the family strategy, the solution is ideal for meeting the POL power module requirements for FPGA designs.”

The ZSPM1005 is in full production. Parts and ZSPM8001 Evaluation Kit are available from ZMDI.

For 5,000 unit quantities, the ZSPM1005 is priced at €1,68 or $2.35 (USD) each.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi