Low-power display for mobile use in sunlight

At the upcoming embedded world 2025, DISPLAY VISIONS is showcasing its sunlight-readable, low-power TFT024-23ATNN colour display for mobile use. In addition to its switchable backlight, this transflective TFT panel also makes use of outdoor light for display purposes.

This means the TFT024-23ATNN can also deliver a sharp and high-contrast display in direct sunlight. In poor lighting conditions, the backlight, with approximately 270 cd/m², helps to improve the readability.

Supplied with 3.3V, the power consumption of the compact colour display without a backlight is an economical 10mA. Based on an eight-hour working day, this is equivalent to an energy requirement of just under 80mAh. This makes the TFT024-23ATNN ideal for installation in mobile devices.

The resolution of the colour display, which is 43mm wide, 60mm high and 3mm thick, is 240 x 320 RGB pixels. Its background is white and the content can be displayed in either colour or black. As an alternative to the standard RGB interface, the TFT024-23ATNN can also be controlled on a PIN-sparing basis via a four-wire SPI interface or a parallel µC data bus with eight or 16 bits. A service life of 50,000 operating hours and reliable operation between -20° and +70°C underscore the great performance of the TFT024-23ATNN for professional use. DISPLAY VISIONS also guarantees long-term availability and full support.

Visit DISPLAY VISIONS at embedded world 2025 (Hall 1, Booth 381) in Nuremberg, Germany, 11-13th March.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

Making RF connections for wearables

Next Post

New security systems trialled at former nuclear site in Dorset