Dual-band MMIC amplifier outperforms S and X-band devices

RFMW is now stocking a dual-band GaN MMIC amplifier from Qorvo, along with design support.

The QPA0004 power amplifier enables next generation radar systems with reconfigurable RF output delivering 9 Watts of Psat RF power in S-band (3.1 to 3.5 GHz) and 8 Watts in X-band (9 to 11 GHz).

Large signal gain is 21 dB (S-band) and 19.0 dB (X-band) from the 7 x 4 mm SMT device operating from a 26 volt bias.

Test results show that a dual, S/X-band implementation of the QPA0004 has better performance than individual S and X-band MMICs combined with a SPST switch, a significant advantage in SWaP-C design considerations.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

FPGA supports LPDDR4 external memory

Next Post

Heilind Electronics, Trafag seal partnership