Digital flame sensor boosts detection distances

27th June 2018
Source: Pyreos Ltd
Posted By : Mick Elliott
Digital flame sensor boosts detection distances

The Sensor + Test exhibition in Nuremberg provided the platform for Pyreos to unveil its ezPyro TO flame sensor with a digital interface. It offers longer distance detection and an impressive field of vision exemplified by CEO Andrew Wallace using a lighter flame virtually sideways on from a distance of six feet and still drawing a response from the sensor.

“It is energy efficient, has a reduced component count and makes product design easier for our customers,” adds Wallace.

Using a digital interface means the sensor can address wider applications than analogue equivalents in the same package. It boosts detection distances from 60 metre up to 85 metres, allowing its use in OEM equipment for flame detection in large spaces including warehouses, car parks, production plants offices as well as monitoring oil rigs and flame detection in forests.

Pyreos is also offering extensive software support.

“We will programme the product according to customer requirements if asked,” says Wallace, “and we will offer support if they want to write the software to their own parameters.”

At the heart of the sensor’s performance is a proprietary ASIC designed in-house by Pyreos and manufactured by TSMC.

The ezPyro TO Flame Sensor couples Pyreos’ thin-film PZT pyroelectric sensors with integrated readout circuitry and an I2C digital communications bus.

This digital version of the Pyreos flame-sensing technology has a higher signal to noise ratio than its analogue TO-packaged equivalent.

The low thermal mass of the thin-film sensor reduces its warm-up time, enabling fast response times and quicker flame detection.

The sensor works in current mode, rather than voltage mode, which enables better accuracy across the full flame-flicker frequency range of 3 to 30Hz.

The current-mode approach also reduces the sensor saturating if a fire breaks out close to it.

The availability of an I2C digital interface, a supporting application programming interface (API), an evaluation kit and C code examples for the ezPyro TO Flame Sensor make it easier for all system designers, including those without analogue experience, to incorporate high-performance flame sensors in robust TO-39 packages into their designs.

The I2C bus simplifies the process of connecting the ezPyro TO Flame Sensor to microcontrollers, and enables designers to configure the sensor’s gain, filtering, sampling rate and power modes digitally.

The I2C serial bus also makes it easy to connect multiple ezPyro sensors on one interface.

The ability to configure the sensor digitally using the I2C bus means that its performance can be tuned on a production line or in operation, and that multiple product variants or performance options can be supported through software selection.

These characteristics should shorten design cycles as well as reducing the bill of materials for individual designs that use the sensor, and the stockholding necessary to offer multiple product variants.

“This new range of sensor is set to really make a difference for designers in terms of cost and performance,” ads Andrew Wallace. “The combination of a widely used packaging option, enhanced performance, a digital interface and associated support tools, as well as this product’s thermal and mechanical stability over many years of operation will really reduce system and implementation costs.”

The ezPyro TO Flame Sensor is available with three band-pass filter options (centred at 3.91μm, 4.48μm or 4.55μm), or a high-pass filter that blocks signals at wavelengths of less than 5.0μm.

An evaluation kit – dPYEFL02 - with PC software that enables sensor configuration, signal visualisation and capture to file is available.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
Ceramics Expo 2019
29th April 2019
United States of America International Exposition Center (I-X Center)
PCIM 2019
7th May 2019
Germany Nürnberg Messe
Electronics & Applications 2019
14th May 2019
Netherlands Jaarbeurs Utrecht Hall 7 Jaarbeursplein
Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI