Air velocity transmitter suits clean room applications

Posted By : Barney Scott
Air velocity transmitter suits clean room applications

The EE660 transmitter from E+E Elektronik measures air velocity down to 0.15m/s and suits laminar flow control and other clean room applications. The E+E thin film sensor used in EE660 operates on the hot film anemometer principle, which is characterised by accuracy, long-term stability and low sensitivity to dirt. The low angular dependence also simplifies installation of the transmitter.

The air velocity transmitter is available for wall or duct mounting as well as with remote probe. The large, flush-mounted LCD display with backlight is 180° rotatable and ensures optimal readability of the measured data.

The EE660 has a current and voltage output, whereby both signals are available on the terminal. The measurement range and the response time can be selected via jumpers. An optional kit facilitates easy adjustment of the transmitter and configuration of the display.

External mounting holes allow quick and easy installation of the transmitter with closed cover. This keeps the electronics protected from construction site pollution. In addition, the electronic components are located on the underside of the PCB and are thus safe from mechanical damage during installation.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

productronica 2019
12th November 2019
Germany Messe München
SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi