Within the management system, the battery-monitoring boards employ two key subsystems to reliably monitor cell health and deliver digital results to a host processor that orchestrates system operation. Separating those subsystems, a signal interface employing optical isolation between high-voltage battery-sensing circuitry and communications devices on the boards ensures that the high voltages will not compromise the digital subsystem.
Li-Ion Cell Characteristics
The sophisticated electronics system required to meet EV performance, safety, and reliability requirements is basically derived directly from the characteristics of Li-ion cells. In a discharging Li-ion cell, lithium is ionized in a (typically) graphite anode, and the Li ions move through an electrolyte to pass through a separator to a cathode, resulting in charge flow. The charging process reverses the flow, bringing Li-ions from the cathode through the separator to the anode.
The performance and reliability of this chemical process are dependent on cell temperature and cell voltage. At low temperatures, the chemical reaction slows, lowering cell voltage. As temperature increases, the reaction rate increases until the Li-ion cell components begin to break down. At temperatures above 100°C, the electrolyte begins to break down, releasing gases that can cause pressure to build within cells designed without pressure-relief mechanisms. At high enough temperatures, Li-ion cells can experience thermal runaway as oxides break down, releasing oxygen, which further accelerates the temperature increase.
Download the full White Paper below.