Vishay Siliconix Extends P-Channel TrenchFET Gen III Technology to Dual 12-V Power MOSFET; New Device Lowers On-Resistance Up to 32 % in 2-mm by 2-mm Footprint Area

Vishay Intertechnology introduced a new dual 12-V p-channel TrenchFET Gen III power MOSFET with the lowest on-resistance ever achieved for a dual p-channel device in the thermally enhanced PowerPAK® SC-70 2-mm by 2-mm footprint area.

With the SiA975DJ, Vishay extends its p-channel TrenchFET Gen III technology to dual 12-V power MOSFETS in the ultra-small PowerPAK SC-70 package for handheld electronics. The new device will be used for load, PA, and battery switches in game consoles and portable devices such as cell phones, smart phones, PDAs, and MP3 players.

For these devices, the lower on-resistance of the SiA975DJ translates into lower conduction losses, allowing the device to perform switching tasks with less power than any previous dual p-channel power MOSFETs on the market in ultra-small packages, thus prolonging battery life between charges. The MOSFET’s low on-resistance also means a lower voltage drop at peak currents to better prevent undervoltage lockout conditions with the IC/load. Alternatively, the designer may be able to use a lower-voltage battery.

The SiA975DJ offers an ultra-low on-resistance of 41 mΩ at 4.5 V, 60 mΩ at 2.5 V, and 110 mΩ at 1.8 V. The closest competing 20-V p-channel device with an 8-V gate-to-source rating features an on-resistance of 60 mΩ at a 4.5-V gate drive and 80 mΩ at 2.5 V. These values are 32 % and 25 % higher, respectively, than the SiA975DJ.

The compact 2-mm by 2-mm footprint of the SiA975DJ’s PowerPAK SC-70 package is half the size of the TSOP-6, while offering comparable on-resistance. 100 % Rg tested, the MOSFET is halogen free in accordance with IEC 61249-2-21 and compliant to RoHS directive 2002/95/EC.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

Vishay’s New Wet Tantalum Capacitor, Approved to New DSCC Drawing 10004, Offers Industry’s Highest Capacitance to 10,000 uF in T1, T2, T3, and T4 Case Codes

Next Post

N500-V Vishay Siliconix N-Channel Power MOSFET Features Low trr of 63 ns, Qrr of 114 nC, and On-Resistance of 1.0 Ω at 10 V