Power

Primary switched DC/DC converters suit railway vehicles

24th May 2016
Barney Scott

MTM Power's PMDS/PCMDS30 series of primary switched DC/DC converters has been especially designed as a decentralised power supply for railway vehicles and industrial applications. These converters operate according to the current source push-pull principle and work with a frequency of 70/140kHz.

Advantages of this switching topology are wide input voltages with constant efficiency, transformer with good coupling and low leakage inductance, at the same time usable for direct control of the secondary synchronous detection. The PMDS/PCMDS30 converters cover an input voltage of 14.4-154VDC with only two different nominal voltages (24VDC, 110VDC).

They are available with an output voltage of 5.1, 12, 24 or 48VDC with 30W. The converters need no ground load and are short-circuit protected by primary and secondary power limitation. Further features are reverse polarity protection in connection with an active input current limiting. Depending on the application the converters are available either for print (110x80x27,5mm) or chassis mounting (110x80x25,5mm).

The converters are maintenance free, vacuum encapsulated, prepared for the use in devices with Protection Class II. They show a mechanically and electrically rugged design using SMD-technology and undergo an automatic piece-by-piece test.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news