Available as 0 to 120 V or 0 to 250 V models, the PLH-P series provide more than 90 W of power from a highly compact quarter-rack form factor.
Fully opto-isolated analogue remote control is incorporated using a scale factor of either 0 to 5 V or 0 to 10 V. Digital remote control is provided by USB, RS-232 and LAN interfaces with GPIB available as an option. The LAN interface is LXI compliant.
The PLH-P series uses special safety binding post terminals, designed by TTi. These are touch-proof to over 250 V and can be used with fixed shroud 4 mm plugs for laboratories that make their use mandatory. However, they can also accept standard 4 mm plugs, spade connectors or bare wires for general-purpose use. Power and sense terminals are duplicated on the rear panel for rack-mounted applications.
The command set is compatible with other TTi power supplies including the QL, PL, QPX and CPX. An IVI driver provides support for common high-level applications such as National Instruments LabView or LabWindows, and HP/Agilent VEE.