Operating current for cameras via PoE

This is an inexpensive, simple and secure way to connect cameras and access points wherever there is no infrastructure for a power supply. This process works so well that many manufacturers have no more separate power supply connections on their devices. These devices take the required operating current only from the data line.

But what if there is not the typical 230VAC or 48VDC or 51V..57VDC voltage available for the feeding devices (PSEs), but rather 12VDC or 24VDC, as can often be found in control cabinets, isolated systems or on vehicles? The injectors that are often included in delivery with the cameras and access points cannot be used here.

The voltage source does not match the injector, nor can these devices be used under the various temperature conditions. There is also not always enough space to install a separate injector for each end device.

UBF EDV Handel und Beratung Jürgen Fischer hold a wide range of injectors (midspan) and switches (endspan) for Fast Ethernet PoE and Gigabit Ethernet PoE according to the standards IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt, which are also available with extended temperature range.