The LTC3788/-1 operates from an input voltage ranging from 4.5V to 38V during start-up, maintains operation down to 2.5V after start-up and can regulate an output voltage as high as 60V. The powerful 1.5Ohm onboard N-channel MOSFET gate drivers are capable of slewing large MOSFET gates quickly, minimizing transition losses and allowing for up to a 10A per channel output current. In addition, the LTC3788/-1 draws only 125µA when one output is active and only 200µA when both outputs are enabled.
The constant frequency current mode architecture allows for paralleled outputs. The LTC3788 includes a clock output, phase modulation (for multiphase applications), two separate power good outputs and an adjustable current limit. The LTC3788/-1 has a phase-lockable frequency from 75kHz to 850kHz or a selectable fixed frequency from 50kHz to 900kHz. It has adjustable cycle-by-cycle current limit protection and uses either a sense resistor or monitors the voltage drop across the inductor (DCR) for current sensing. In applications where the input voltage may sometimes exceed the regulated output voltage, the LTC3788/-1 is able to keep the synchronous MOSFET on continuously so that the output voltage follows the input voltage with minimal power loss. Furthermore, the LTC3788/-1 has adjustable soft-start and maintains ±1% reference voltage accuracy over an operating temperature range of -40ºC to 125ºC.