Emerson Network Power launches high efficiency 50 watt and 100 watt external ac-dc power adapters

Emerson Network Power today launched two new series of high efficiency external ac-dc power adapters. These latest additions to the company’s rapidly-expanding portfolio of Astec ac-dc power adapters produce fully regulated outputs, and feature a universal 90-264 Vac input, enabling them to be used anywhere in the world. The new 50 watt AD50 series power adapters produce a single 12 V output and can deliver up to 4.16 A continuously, while the new 100 watt AD100 series models produce a single 48 V output and can deliver up to 2.08 A continuously.

Astec AD50 and AD100 series freestanding ac-dc power adapters provide a very flexible, pre-approved power solution for a wide variety of portable and desktop applications, including instrumentation, telecommunications, computer peripheral and test and measurement systems. The AD50 series adapters are also available with medical safety approvals for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.

All Astec AD50 and AD100 series ac-dc power adapters are high efficiency switch-mode designs that comply with the One Watt Input Energy Star/Blue Angel requirement. The AD50 series have a typical power conversion efficiency of 80%, while the AD100 series offer an even higher figure of 90%. The AD50 series adapters are available with a choice of a 3-pin (type C6) or 2-pin (type C8) IEC320 ac input receptacle, to accommodate customers’ desired configuration of line cord. The 3-pin versions of the adapters have a safety-ground leakage current of 300 µA maximum, while the 2-pin versions offer an even lower figure of just 100 µA. The adapters’ dc output is provided via a cable fitted with a standard 2.5 mm I.D, 5.5 mm O.D. barrel plug.

AD50 series power adapters have a full load ambient operating temperature range of 5šC to +40šC without de-rating, while the AD100 series offers a slightly wider operating range of 0šC to +40šC. All the adapters are comprehensively protected against overvoltage and overpower conditions, with automatic recovery, and have a high demonstrated MTBF of 300,000 hours at full load and 25šC ambient. They all comply with the rigorous EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5, -6, -8 and -11 levels 3. The power adapters also carry a comprehensive set of safety approvals, including UL/CSA 60950-1,VDE/CB EN60950-1 and CE Mark. The medical versions of the AD50 have the following certifications: UL/CSA60601-1, VDE EN60601-1 and CE Mark LVD.

Astec AD50 and AD100 series external power adapters are available for immediate delivery.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

ZYFILM™ enables LCD shop-window displays to go interactive

Next Post

Microchip Introduces Flash Data Memory to the Baseline PIC® Microcontroller Architecture