The LT3760 offers ±2.0% (±0.7% typical) LED current matching to ensure uniform brightness of the display. Dimming ratios as high as 3,000:1 can be attained by using True Color PWM™ dimming. A programmable 100kHz to 1MHz fixed frequency operation and current mode architecture offers stable operation over a wide range of supply and output voltages while minimizing the size of the external components. Additionally, the switching frequency is synchronizable to an external clock. Its thermally enhanced TSSOP-28 package offers a highly compact solution footprint for most LED backlighting applications.
The LT3760 uses an external N-Channel MOSFET switch to provide a boost mode constant current source. However, even when VIN exceeds VOUT, the LT3760 will continue to accurately regulate the LED current. The internal boost controller uses an adaptive feedback loop to drive up to eight channels of ten 100mA LEDs to regulate the output voltage slightly higher than the required LED voltage to ensure maximum efficiency. If any of the LED strings experience an open circuit, the LT3760 will continue to regulate the existing strings and signal the FAULT alert pin. If higher current LEDs are required, multiple strings can be combined, enabling the LT3760 to drive up to four channels of ten 200mA LEDs or two channels of ten 400mA LEDs. Additional features include programmable LED current derating based on junction temperature and LED temperature and programmable output voltage limiting when all LED strings are disconnected.