Compared to a linear regulator circuit, the LTM8020’s more efficient switch-mode topology provides cooler operation, dissipating 98% less heat and occupying 90% less volume (area x height) with its compact package and no-heatsink requirement (comparison conditions: 36VIN, 1.5VOUT, 200mA, TA=25°C). Target applications are systems with 24V and 28V input supply rails such as medical, industrial, avionics and after-market automotive.
The LTM8020 is a complete 200mA, current mode, switching DC/DC point-of-load regulator system in a 6.25mm x 6.25mm x 2.3mm LGA (Land Grid Array) surface-mount package. The package can be mounted on the back side of a circuit board, allowing more room for digital ICs on the top side. Input voltage range is from 4V to 36V and output can be adjusted with only one resistor from 1.25V to 5V. Encapsulated packaging protects the circuit components against mechanical, chemical and ambient factors, thus improving the reliability of the design. The LTM8020 is rated for operation from -40°C to 85°C and is ROHS compliant. Its gold-plated pads allow both Pb- and Pb-free solder to be used during board assembly. 1,000-piece pricing starts at $4.95 each.