Ericsson Surface-Mount Advanced Bus Converter Saves Board Space
Ericsson Power Modules have today announced the introduction of a new surface-mount DC-DC converter module. The BMR456-SI is based upon the FRIDA II platform, which was announced last year, both the surface-mount BMR456-SI and the through-hole BMR456-PI quarter-brick 3E* Advanced Bus Converters deliver unprecedented performance to system architects that are developing equipment for ICT applications.Thes
Since the shipment of the first surface-mount version of the company’s FRIDA platform in 2010, the platform has enjoyed significant adoption with the growing demand for high-power DC-DC modules to power highly integrated surface-mount boards. “Ericsson is the only company in the industry to offer high-power DC-DC modules that are digitally controlled and also offer a surface-mount option,” said Patrick Le Fèvre, Marketing and Communication Director, Ericsson Power Modules. “The addition of a surface-mount version to the PMBus compliant FRIDA II BMR456 DC-DC converter family is an indication of the strong market demand for highly integrated power technology that can also make a significant contribution to reducing energy consumption.”
Surface Mount for Increasing Board Density Board density is increasing and to simplify manufacturing processes, power module suppliers need to offer surface-mount alternatives to conventional through-hole versions. Although it is not necessarily an issue at low- and mid-power levels, it can be a significant challenge for high power modules and even more so when these modules require additional I/O.
Ericsson’s advanced mechanical surface-mount technology is based on highly accurately tooled pins that are inserted and aligned during the original assembly process. The same hardware is used for through-hole and surface-mount versions of the BMR456, which increases the flexibility and speed of manufacturing and contributes to smaller lead times. The surface-mount pins are manufactured with very tight tolerances, guaranteeing co-planarity and mechanical accuracy. This process ensures high reliability and host equipment availability.
In addition to input and output power connections, additional I/O (+/– output remote sense, address pin, PMBus clock and data, power good and user configurable I/O, PMBus ground, PMBus alert signal and PMBus remote control or current sharing) is made available through a micro-interface. This connector has been designed to comply with Ericsson’s advanced high-precision surface-mount technology and to guarantee full alignment and co-planarity during different soldering processes.
FRIDA II Platform
The FRIDA II generation of fully regulated digital DC-DC converters is based on a 32-bit ARM microcontroller that embeds the family’s most advanced firmware to date, called the ‘Ericsson DC-DC Energy Optimizer’. This combines advanced Ericsson Intellectual Property together with a series of industry-first functionalities to continually optimize switching parameters and reduce energy consumption to an absolute minimum. The firmware has been developed to guarantee the highest possible performance at any point of operation from low load to high load, and to handle line transients, such as those occurring in ATCA applications when, for example, switching from Feed A to Feed B.
Designed to power telecom and datacom applications, the BRM456-SI is available in two input voltages ranges: 36V to 75V (telecom), delivering output power of 420W; and 40V to 60V (datacom), delivering output power up to 468W. Output voltage can be adjusted across a range from 4.0V to 13.2V via PMBus commands, making the module suitable for Dynamic Bus Voltage operation resulting in the reduction of energy consumption when communication data traffic is low.
In addition, taking full advantage of a highly optimized layout and firmware-optimized parameter switching to reduce power losses, the BMR456-SI delivers a typical efficiency of 96.5% and exhibits flat curve behavior from 14% to 100% load, positioning the product as the most efficient Advanced Bus Converter in its category.
The BMR456-SI meets the insulation requirements of EN60950, sustains an I/O isolation voltage of 2250 VDC, and also offers an extensive set of capabilities and features such as: remote sensing; PMBus-configurable protection (over-temperature, over-current and over-voltage); configurable start/stop; precision delay ramp-up; voltage margining; configurable fault response; power good; and extensive power management programmability.
* 3E stands for: Enhanced Performance, Energy Management, and End-user Value
12th June 2013
Ericsson Regulated Quarter-Brick Module Raises the Bar to 750W for High-Power Datacom Applications
19th March 2013
New Ericsson power interface modules integrate digital communication abilities to simplify energy monitoring