This sensor is ideal for a wide range of consumer and industrial applications that need a global shutter to avoid motion blur, along with top NIR performance for low- and no-light conditions.
The OG01A is well-suited to multiple machine-vision applications, including AR/VR headsets, drones, robots, and simultaneous localisation and mapping (SLAM), as well as facial authentication in smartphones and other consumer electronics. This technology is also ideal for automotive in-cabin driver state monitoring and eye tracking.
“The OG01A has the industry’s smallest global shutter pixel and provides the best NIR performance in a GS sensor,” said Devang Patel, Senior Staff Marketing Manager for the Security and Emerging Segments at OmniVision. “There is a growing need for global shutter technology to accurately capture images of moving objects, along with excellent NIR performance and small size, in camera applications such as AR/VR headsets, drones, robots and smartphones. The OG01A delivers the industry’s best combination of features for these applications.”
The one megapixel OG01A image sensor provides 1280×1024 resolution at 120 frames per second (fps) and 640×480 resolution at 240fps in a compact 1/5 inch optical format. High shutter efficiency allows for cleaner motion capture and a high dynamic range. The sensor’s low-light sensitivity is also excellent, with significantly lower gain than the typical 3.0μm pixel size for an improved signal-to-noise ratio.
The sensor’s high modulation transfer function (MTF) enables sharper images with greater contrast and more detail, which is especially important for enhancing decision-making processes in machine vision applications. The OG01A also has a high QE of 40% at 940nm and 60% at 850nm.
This industry-leading QE enables the sensor to see farther and better in low- and no-light conditions, which allows designers to use less IR LED light and achieve lower system-level power consumption. For AR/VR headsets, this reduces heat generation. For industrial and robotics applications, designers can use fewer IR LEDs for lower system cost, or use the same number of IR LEDs to achieve a greater image detection range.