Optoelectronics

CC power supply for intelligent LED lighting control

17th June 2014
Nat Bowers
0
Datasheets

Designed to provide a lower wattage power solution for project style lighting design, MEAN WELL has announced the release of the LCM-25(DA) LED power supply. This 25W multiple-stage Constant Current (CC) output device allows users to flexibly select the output current level by the built-in DIP switch.

The LCM-25 basic model is designed with the built-in 2 in 1 dimming function (0-10V DC and PWM signal), whereas the digital control model, LCM-25DA, is equipped with the DALI interface and push dimming function. Suitable applications include LED commercial lighting, LED office lighting, indoor LED decorative lighting, and etc.

These units can fulfil the increasing needs of intelligent digital dimming applications. Accepting 180-277V AC input and the built-in two stage PFC function, LCM-25(DA) series observes the harmonic current limitation per EN61000-3-2 Class C ( greater than 50% load). In addition, it possesses 2kV heavy-industry level surge immunity capability between Line and Neutral, following the related luminary requirements.

With next generation electric circuit topology, LCM-25(DA) provides the efficiency up to 86%, and can be cooled by free air convection from -30 to +60℃ ambient temperature. This series is designed with the synchronisation dimming function that up to 10 drivers can be controlled synchronously to make the dimming control signals of the LED lighting system with multiple lighting fixtures consistent. LCM-25(DA) is a rectangular and low-profile (23mm) plastic enclosed power supply.

Different from the general design with input at the front and output at the rear, the I/O connection of this model is on the same side, which allows system designers to sufficiently take use of the limited space when wiring and installing the units. Other standard functions encompass Class II design (no FG), protections for short circuit and over temperature. The power supply is certified with various international lighting safety regulations such as UL8750, ENEC EN61347-2-13, and EN62384. LCM-25DA is also complied with IEC62386-101, 102, 207 norms per DALI lighting control systems.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier