Along with the Samsung S3C6410 micro processor clocked to 667MHz, the upgraded OK6410-H now carries 256MB ddrRAM and 4GB NAND Flash, so as to provide more capacity and faster speed to run embedded operating systems and user applications.
Other hardware features of OK6410-H include:
• Samsung S3C6410 microcontroller based on the ARM1176JZF-S core, main frequency @ 533/667MHz;
• 256MB Mobile DDRram;
• 4GB NAND Flash;
• One reset button implemented with specific reset chip;
• 8-bit toggle switch for selecting boot mode;
• Four serial ports, including 1 5-wire RS232 and 3 3-wire RS232;
• One 100M Ethernet port with DM9000AE and indicators;
• One USB Host interface supporting USB1.1 protocol;
• One USB Slave (MINI-USB) interface supporting USB2.0 protocol;
• One high-speed SD card slot supporting SD Memory and SDIO;
• One WIFI expansion interface;
• Stereo audio I/O sockets;
• LCD and touch screen interface supporting 3.5¡±, 4.3¡±, 5.6¡±, 5.7¡±, 7¡± TFT LCD;
• One CVBS output interface (PAL/NTSC)
• One CMOS camera connector supporting ITU-R BT601/656 8-bit mode;
• Built-in RTC with back-up battery;
• One JTAG interface using 2*10pin connector;
• One Infrared receiver;
• Four user LEDs;
• One Buzzer;
• Three 2*10pin expansion interfaces. Including 1 x GND, 1 x DA, 8 x AD, 10 x IO, 1 x SPI;
• Dimension: 145 x 105mm
• Temperature Range: -20℃ to 70℃
On the software part, most of the popular embedded operating systems are supported by the OK6410, such as Embedded Linux, Windows CE, Android, Vxworks, and uCos/II.
Board support packages and sample programs are provided with source code, binaries, and documentations for most of these mainstream embedded operating systems, including Windows CE 6.0 R3, Linux-3.0.1 and Android 2.3 to help users simplify their development cycle.
The OK6410-H with 4.3 LCD ARM11 development kit is available now for US$145.00.
