Design
CAN FD controller with integrated transceiver
From Texas Instruments, the EVM can be used to evaluate the TCAN4550 SPI to CAN FD Controller and Transceiver solution. The CAN bus signals are easily accessed via a DB9 connector (or via header pins), and the digital interface (SPI lines plus GPIOs) is accessible via a single dual-row header.
Input clocks to the device can come from either an on-board crystal or from an external single-ended clock source.
Features
- Provides access to CAN bus, SPI, clock, and all GPIO signals.
- Clock input can be configured for on-board crystal or external clock source.
- CAN bus termination can be enabled/disabled via jumpers.
- Status LEDs indicate board power status and GPIO pin states.
To learn more, click here.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
