The Draco vario Repeater family incorporates cross-conversion between Cat X and fibre cables. Signals available on a Cat X network may be converted to fibre for transmission and converted back to Cat X at the receiver (or vice-versa). This is useful in bridging buildings with copper-based networks that are located some distance apart. High-quality signal processing and integral amplification ensures no signal degradation or transmission artifacts. Both device options can be deployed between extenders or matrices and between extender and matrix.
The cross repeater works with Draco vario extenders with the redundant option. The cross repeater is installed in a secondary path to provide backup to the primary KVM matrix switch. In the event of failure, signals are transmitted from the transmitter to the receiver through the cross repeater, bypassing the matrix.
The Draco vario Repeater family features bidirectional data ports: Cat X and fibre ports are individually configurable as inputs or outputs. No additional configuration is required. Single- and dual-repeater board versions are available for installation in Draco vario frame enclosures.