“Axiomtek has introduced the iCON-83000, an IEC 61850-3 and IEEE 1613 compliant Ethernet switch for substation automation applications. The IEC 61850-3 and IEEE 1613 standards define the highest standard of EMI immunity and error free communication requirements for network equipment used in substations. Meeting these strict certifications proves iCON-83000 can against a variety of environmental factors. Up to sixteen 10/100Base-TX ports and two combo Gigabit ports can be chosen to make the construction of a reliable Ethernet network easy. Additionally, this intelligent item applies high quality components with advantages of wide operating temperature range and long MTBF to keep your industrial applications running non-stop. With Axiomtek’s iCON-83000 Ethernet switch, users can save on cabling and wiring costs and speedily transform existing devices into more powerful and intelligent,” said Ethan Wang, Product Manager of Product & Marketing Division at Axiomtek. It can be DIN-rail or panel mounted. Moreover, the rugged device comes equipped with a 12~48 VDC redundant power inputs via a terminal block or power jack, and is secured with power polarity reverse and an overload current resettable fuse.
The iCON-83000 hardened managed Ethernet switch supports advanced features such as IEEE 802.1Q VLAN, port trunking, IGMP snooping, rapid spanning tree, QoS IEEE802.1p/1Q, and port mirroring. Users may choose among SNMP/RMON, web browser, or telnet for remote monitoring and configuration. It also supports rate control, which allows users to set the maximum bandwidth on each port individually. Otherwise, the iCON-83000 switches offer IEEE802.1X port-based network access control for network security. In addition to RSTP/STP for Ethernet redundancy, the iCON-83000 series features redundant ring technology with a recovery time under 15ms. With Auto MDI/MDIX function supported, users can easily expand network without using special cabling, and the auto-negotiation capability allows users to connect client or other switches without any configuration. Besides, the iCON-83000 comes with full wire-speed forwarding rate.
Advanced Features:
Ÿ Complies with IEC61850-3 & IEEE1613 environmental requirements for power substation automation systems
Ÿ Complies with EN50121-4 environmental requirement for railway application
Ÿ Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
Ÿ Proprietary α-ring support for network redundancy; recovery time <15ms Ÿ IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible Ÿ IP multicast filtering through IGMP snooping V1, V2 & V3 Ÿ Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP Ÿ IEEE802.1p QoS with four priority queues MAC-based trunking with automatic link fail-over RS-232 console, Telnet, SSL/SSH, SNMP V1& V2c & V3, RMON, Web browser, and TFTP management Ÿ Supports command line interface in RS-232 console Ÿ Supports IEEE802.1x security Ÿ Bandwidth rate control Ÿ Per-port programmable MAC address locking Ÿ Up to 24 static secure MAC addresses per port Ÿ Port mirroring Ÿ 1000Mbps-full-duplex, 10/100Mbps-full/half-duplex, Ÿ Auto-negotiation, auto-MDI/MDIX Ÿ Full wire-speed forwarding rate Ÿ Alarms for power and port link failure by relay output Ÿ Redundant power inputs with terminal block and DC jack Ÿ -40°C to +75°C (-40°F to +167°F) operating temperature range Ÿ Supports NTP