Designer suspension arm is elegant & ergonomic
ROLEC has unveiled its latest range of profiPLUS designer suspension arms. Elegant and ergonomic, the profiPLUS modular system offers a huge range of couplings, joints and sections to create the suitable suspension arm solution. ROLEC profiPLUS is quick and easy to install, either vertically, horizontally or on the floor. It offers alignment of the complete system in a horizontal direction through a single set screw. ROLEC has applied for a patent for this clever solution.
The latest profiPLUS is available in two models, 50 (51.5mm wide) and 70 (70.2mm wide), to offer a choice of load and cable capacities. They have been designed to integrate with ROLEC’s commandCASE, topVISION, multiVISION and command aluFACE enclosures.
Each profiPLUS model offers more than 40 different components including 30 couplings, hanging and upright in both rotary and ‘turn and tilt’ configurations; three highly stable ball-shaped joints (wall, socket, intermediate) and five support profiles, from 0.25 to 1.50m.
Console couplings have reduced installation depths to save space. The profiPLUS 50 also offers specialised adapters for display panels including Siemens and Beckhoff. All system components are manufactured from cast aluminium (Light Grey RAL 7035), while the support profiles are in silver anodised aluminium.
Installation covers are moulded from Polyoxymethylene (Anthracite Grey RAL 7016). All the seals are Chloroprene (-30 to +90°C), while the bellows are plasticised Polyvinyl Chloride (Anthracite Grey RAL 7016, -30 to +70°C). Both the 50 and 70 models are rated to IP 54.