Mini-ITX motherboard for robotics and network applications

  WIN Enterprises, Inc. has announced the WIN MB-83100 Mini-ITX motherboard for robotics, gaming and other network applications. It features the Intel Braswell CPU on the Mini-ITX small form factor. WIN offers local U.S. support, revision control, and product designs with long-life embedded components.

FEATURES OF MB-83100

• Long-life industrial Mini-ITX motherboard ideal for embedded applications
• Intel Braswell N3060/N3010/x5-E8000 CPU is on-board
• Single DDR3L 204pin SO-DIMM slot (max. up to 8GB non-ECC)
• Supports 2 external DP++/HDMI Triple Display
• Dual Intel i211-AT with 10/100/1000 Mbps Ethernet controller
• 4x USB 3.0/4x USB 2.0 Port
• Fintek F81866AD I/O chip supports 4x COM Port (2 ports belong to D-Sub 9 pin / 2 port belongs to 2×5 pin header (RS-232 with 2.0mm pitch)
• Realtek ALC888S-VD2-GR it audio chip supports Line-out/Line-in/Mic-in Audio Jack, Line-out/Line-in/Mic-in audio jack
• 1x CFast Socket (SATA Port 0), 1x SATA III port (SATA Port 1)
• Supports 4 in & 4 out Digital IO (2×6 pin header)
• PCIe X4 expansion slots
• 0°C to +60°C operating temperature

IP-M01 DATA RECOVERY MODULE

The MB-83100 can be combined with the IP-M01 PCIe module to provide for the recovery of a faulted data stream to its the last trusted data. This means critical data is not lost in applications that can span robotics, ATM, gaming and others. The IP-M01 is a batteryless MRAM module with non-volatile RAM for critical data accessing.

FEATURES OF IP-M01

• IGLOO2 SoC FPGA processor
• Capacity support to 4MB
• Hardware mirroring backup without consuming software resources
• Critical data is retained in a power failure
• Provides power supply failure detection

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

How lighting sensors can help keep people safe

Next Post

Integration of Ethernet switch into NVIDIA DRIVE Pegasus Platform