Interface to the system is accomplished via a high-speed serial bus that is made up of SEN, SCLK and SDIO. Initialization of internal registers after power-on reset, operational setup, and laser intensity data for each output channel are communicated through this bus.
To assist with reduction of laser speckle, this laser diode driver has a high frequency modulation input to modulate laser pulses.
For laser operational safety, a hardware enable signal (CE) is ANDed with an internal register bit. Both have to be asserted to enable the device. This prevents an accidental fault causing an unwanted laser output.
Applications
RGB Color Field Sequential Laser Projection System
Hand Held Projector
Smart Phone
https://www.youtube.com/watch?v=eySGJIDbHyE