Translucent antennas to be showcased
Pulse Electronics Corporation's line of translucent antennas will be showcased at Booth 2440 at the DistribuTECH Conference and Exposition, being held at the Orange County Convention Center, Orlando, FL, February 9-11th, 2016. Pulse's Distributed Antenna System (DAS) ultra-thin, clear, ceiling mount antennas have been selected to enable wireless network coverage in building 7 of the World Trade Center, New York, NY.
The Pulse antenna lines include the PIMinator series of industry leading -155 dBc certified low Passive InterModulation (PIM) DAS ceiling mount antennas. The Pulse/Larsen line of DAS in-building low PIM omni antennas meets the most demanding PIM requirements for 2G, 3G, and LTE/4G bands. The Clarity family of antennas operates at UHF band frequencies, including 380-520 MHz and 698-960 MHz, to improve public safety radio coverage.
The Clarity-Pearl antennas deliver an architecturally pleasing solution to requirements set by the International Fire Code and National Fire Protection Association (IFC/NFPA) codes for public safety in-building communication. Their ultra-thin white UV stabilised plastic radome is 311mm in diameter and protrudes just 9.5mm below the ceiling for the lowest in-building antenna profile in the industry.
The Monarch Series multi-mode global navigation satellite system ceramic antennas provide wireless signal reception for the four major global and regional satellite systems: GPS, GLONASS, Beidou (Compass) and Galileo. These compact, low profile antennas deliver high efficiency (75% typical) over a wide bandwidth for enhanced navigation and device tracking.
The Panther series GPS/multiband vehicle-mount antennas give superior port-to-port isolation for excellent signal clarity that improves data throughput and navigation for telematics, infotainment, and location-based applications in all types of fleet, public safety, delivery, utility and transit vehicles.
Several other new families of antennas will be on display. Pulse has custom and catalog antennas for both indoor and outdoor use with all types of mounting options. Pulse has extensive manufacturing technologies (FPC, stamping, LDS, cable assemblies, Fluidant, ultrasonic welding, acoustic modules) and extensive 24-hour prototyping capabilities with manufacturing in both the USA and China, R&D facilities in the US, Europe, Asia and a worldwide support network.