The 2-pole switch – dimensioned for inrush current peaks of 100A capacitive for 3ms – is available in either an illuminated or non-illuminated arrangement. The series can be equipped with 1- or 2-pole fuse holders for 5×20 fuse-links. The DD21 is rated for currents at 8 and 10A; the DD22 series for 1, 2, 4, 6, 8, 10 A.
The power entry modules fulfill IEC/EN 60950 requirements, and are ENEC and UL/CSA approved up to 10A 250VAC 50Hz and 8A 125/250VAC 60Hz respectively. On request we can offer special configurations such as protection class II arrangements or filters with special X1 capacitors for increased dielectric strength.
Mounting takes place using M3 or self-tapping screws onto a PCB or on the rear of the housing with M3 screws.
