Its broad frequency range makes it suitable for a wide range of wireless communications applications, including in GPS, GSM, DCS, PCS, WiFi, Bluetooth, and IEEE 802.11a/b/g/n/y WLAN systems. Isolation between ports typically ranges from 14 dB to 18 dB, with typical insertion loss of 1.5 dB and maximum VSWR of 1.80:1. The divider boasts amplitude balance of typically ±0.3 dB and phase balance of typically ±4 deg. across the full frequency range. The four-way power divider, which features an integrated broadband DC blocking capacitor, is rated for maximum input power of 30 W. It is supplied in a compact package measuring just 2.5 x 3.75 x0 .38 in. with side mounting surface and SMP connectors for space-limited locations.
Features:
• Multi-Octave Bandwidth
• Moderate Power Handling
• Excellent Phase & Amplitude Balance
• Standard SMA Connectors (N, BNC, TNC optional)
Mechanical Specs:
Finish: Chemical Conversion Coating per MIL-DTL-5541 Class 3 (optional paint available upon request)
Marking: All units supplied with P/N and date code on polyester label (special marking available upon request)
Electrical Test: All units tested on a Go/No-go basis (plotted data available upon request). Specifications indicated are subject to change. Unless otherwise specified, electrical properties correspond to use with standard SMA connectors.
Dimensions: All dimensions are expressed in inches, (1 inch = 25.4mm). All dimensions indicated are subject to change. Unless otherwise specified, tolerances for decimals are ±0.02 for .XX and ±0.005 for .XXX. Tolerances for angles are ±0°30′.
Temperature: Units designed to operate –55° to +85° C.