RFID SMT Antenna with comprehensive protection for automotive applications

PREMO launches a new family of its 1103 standard, universally adopted by industry. This format provides up to 55mV/Apk-pk/m sensitivity which gives it the best sensitivity by cm3 in the market. The new SDTR1103CAP, is a SMD antenna for low frequency 20kHz-150kHz receiver applications. This series offers upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with high thermal stability (supports up to 290 º C) and mechanical resistance (exceeds 150Mpa if mechanical strength).

This antenna is equipped with NiZn ferrite core with high surface resistivity (> 10Mohm/mm) that provides a highly stable behavior (rather than / -2%) over a wide temperature range (-40 º C to 125 º C).

The new SDTR1103CAP, is an SMD antenna with Super-Drop-Test-Resistant technology with an extended range of operating temperature (-40° C to 125 º C), which makes it particularly suitable for applications such as TPMS (Tire Pressure Monitoring Systems) which requires an excellent performance under extreme conditions, according to AEC-Q200 and additional requirements as EU regulations.

PREMO offers four standard values, 2.38mH, 4.91mH, 7.2mH and 9mH at 125kHz. Others inductance values and frequencies, from 340uH to 16mH, upon request.

Its surface mount (SMT) allows an easy use in the automated process of mounting circuit boards, thus eliminating any manual handling.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

Low Cost USB Data Acquisition Modules…...Now With Sampling Rates Up To 100 kHz

Next Post

No-Opto 100V Isolated Monolithic Flyback Regulator Operates over a -55°C to 150°C Junction Temperature Range