Companies

OPTEK Technology

  • 1645 Wallace Drive Carrollton, Texas
    75006
    United States of America
  • 1-800-341-4747
  • http://www.optekinc.com
  • 1-972-323-2396

OPTEK Technology Articles

Displaying 1 - 20 of 32
Tech Videos
25th January 2012
Optek Flexible LED Lighting Strips -- Another Geek Moment

Watch as Steve demonstrates some of the applications for Optek's LED Lighting Strips, such as Under the Counter Lighting, Decorative Lighting, Background Lighting, and a few Not-so-Typical applications. The possibilities are endless!

Optoelectronics
26th August 2011
LEDs and Heat: Managed or Micromanaged?

All of the focus on thermal management of light emitting diodes raises the question: is it always worth the cost? For LEDs, every penny must be applied efficiently. The benefits of lower junction temperature are well known, but there is a tipping point between investing additional product cost in thermal management and getting a return on that investment. Good thermal management starts with clear product and application definition.

Optoelectronics
16th August 2011
Thermal Management of Visible LEDs

The purpose of this application bulletin is to answer design questions about high-power visible light emitting diodes (LEDs).

Sensors
17th June 2010
TT electronics OPTEK Technology enhances long distance reflective switch with adjustable sensitivity

Providing design engineers with an adjustable reflective switch to meet a number of non-contact reflective object sensing application needs, TT electronics OPTEK Technology has enhanced its long distance reflective switch with adjustable sensitivity and simplified mounting. The OPB725A-18Z device uses an infrared LED and a logic output sensor in a reflective switch configuration, and features a reflective sensing distance of up to 24” depending...

Optoelectronics
13th May 2010
OPTEK's LEDs Used in Lava Tunnel Exhibit

TT electronics OPTEK Technology’s LED module strips and flexible LED light strips have been employed by Adirondack Studios in the design and fabrication of the “Changing Earth” exhibit at the Franklin Institute in Philadelphia, PA. The exhibit includes a Magma Crawl display – a crawl-through fiberglass tunnel that uses a sequence of programmed lights and heating elements to simulate the flow of lava through the earth.

Optoelectronics
13th May 2010
OPTEK's LEDs Used in Lava Tunnel Exhibit

TT electronics OPTEK Technology’s LED module strips and flexible LED light strips have been employed by Adirondack Studios in the design and fabrication of the “Changing Earth” exhibit at the Franklin Institute in Philadelphia, PA. The exhibit includes a Magma Crawl display – a crawl-through fiberglass tunnel that uses a sequence of programmed lights and heating elements to simulate the flow of lava through the earth.

Passives
11th May 2010
TT electronics OPTEK Technology Offers One of The Industry’s Most Cost-Effective Miniature Incremental Encoders

Providing design engineers with a cost-effective, high pulse per revolution device for applications with small shaft motors, TT electronics OPTEK Technology offers a family of low-cost miniature incremental encoders. The OPE1275 and OPE2275 single- and dual-channel encoders are designed specifically for use in printer motors, machine automation and machine safety equipment.

Passives
26th April 2010
TT Electronics OPTEK Technology Develops Non-Contact Slotted Optical Switch In Right-Angle Package

Providing design engineers a flexible optical device with multiple output configurations, TT electronics OPTEK Technology has developed a Photologic slotted optical switch in a right angle package. Designated the OPB920xZ Series, the non-contact switch consists of an infrared LED mounted on the tower and a Photologic sensor mounted on the base of a right angle shaped package. The OPB920 Series digital switches complement OPTEK’s proven OPB420 ...

Optoelectronics
31st March 2010
OPTEK Technology Develops Miniature Infrared Optoelectronic Sensor with Logic Output

For design engineers with the requirement for a compact infrared sensor, TT electronics OPTEK Technology has developed a small surface mount packaged photo light sensor with a digital output ideal for applications with limited space. Designated the OPL611 Series, the sensors feature data rates to 250kBaud and consist of a Photologic chip encapsulated in transparent molded plastic, providing optical coupling as well as mechanical protection.

Optoelectronics
31st March 2010
OPTEK Technology Develops Miniature Infrared Optoelectronic Sensor with Logic Output

For design engineers with the requirement for a compact infrared sensor, TT electronics OPTEK Technology has developed a small surface mount packaged photo light sensor with a digital output ideal for applications with limited space. Designated the OPL611 Series, the sensors feature data rates to 250kBaud and consist of a Photologic chip encapsulated in transparent molded plastic, providing optical coupling as well as mechanical protection.

Power
24th February 2010
OPTEK's High Voltage Optoisolator

Providing power electronics design engineers with a high voltage device capable of high speed digital data transmission, TT electronics OPTEK Technology has developed an optical isolator that delivers AC and DC voltage isolation up to 16KV while achieving digital data transmission rates of 2Mbd. Designated OPI1268, the UL-recognized high voltage optoisolator is designed for power isolation in high voltage PC board circuits in industrial electroni...

Sensors
10th February 2010
OPTEK's Fluid Sensor for Medical Tubing

Providing medical design engineers with a cost-effective alternative to ultrasonic sensors, TT electronics OPTEK Technology's OCB350 fluid sensor features automatic calibration circuitry and is available with multiple output states including fluid present, no fluid present, and no tube present. The sensor is ideal for medical applications including monitoring fluid or air presence in tubing for infusion and transfusion pumps where fluids of diffe...

Optoelectronics
20th January 2010
OPTEK’s Miniature Reflective Object Sensor Employed In Infusion And Transfusion Pumps, Medicine Dispensing Equipment

Providing medical electronics design engineers with a reflective device capable of an enhanced sensing range in space-constrained applications, TT electronics OPTEK Technology’s OPB733TR reflective object sensor is being deployed in a wide range of medical equipment. The reflective sensor measures just 0.300 x 0.160 with a PC board-mounted profile of just 0.114 and incorporates a lensed IR LED and phototransistor elements to collimate the light...

Optoelectronics
20th January 2010
OPTEK’s Miniature Reflective Object Sensor Employed In Infusion And Transfusion Pumps, Medicine Dispensing Equipment

Providing medical electronics design engineers with a reflective device capable of an enhanced sensing range in space-constrained applications, TT electronics OPTEK Technology’s OPB733TR reflective object sensor is being deployed in a wide range of medical equipment. The reflective sensor measures just 0.300 x 0.160 with a PC board-mounted profile of just 0.114 and incorporates a lensed IR LED and phototransistor elements to collimate the light...

Analysis
22nd December 2009
OPTEK’s Slotted Optical Switch Employed In Bigbelly Solar Trash Compactors

TT electronics OPTEK Technology’s OPB810L51 wide gap slotted optical switch has been employed in BigBelly Solar trash compactors. The OPB810L51 device functions as a non-contact sensor to determine the exact position of the compaction ram.

Pending
19th November 2009
OPTEK - Long Distance Reflective Switch

Providing alternative energy design engineers with a means of reliably and accurately detecting the speed of wind turbines, TT electronics OPTEK Technology’s OPB732 Series long distance infrared reflective switch has been employed in a 6kW wind turbine for RPM sensing. Placed at the turbine rotor, the switch is used internally to sense RPMs, and that data is then transmitted to a customer-accessible Web site via GPRS.

Optoelectronics
21st September 2009
OPTEK Donates LEDs to University Contest

Providing engineering students with a flexible, high brightness LED solution that ultimately helped them win a design competition, TT electronics OPTEK Technology donated 200 high brightness LEDs to an engineering team at North Carolina State University participating in the 2009 North Carolina Engineering Day. OPTEK’s OVQ12S30x7 flexible LED light strips were utilized in the design for illumination of a pedestrian bridge at the Legislative Comp...

Optoelectronics
21st September 2009
OPTEK Donates LEDs to University Contest

Providing engineering students with a flexible, high brightness LED solution that ultimately helped them win a design competition, TT electronics OPTEK Technology donated 200 high brightness LEDs to an engineering team at North Carolina State University participating in the 2009 North Carolina Engineering Day. OPTEK’s OVQ12S30x7 flexible LED light strips were utilized in the design for illumination of a pedestrian bridge at the Legislative Comp...

Passives
6th August 2009
OPTEK - Miniature Incremental Encoders

Providing design engineers with miniature devices designed for general encoding of low speed applications, TT electronics OPTEK Technology has developed a family of single- and dual-channel incremental encoders. Designated the OPE1275 single-channel (tachometer) and OPE2275 dual-channel encoders, the analog output encoders are designed for small shaft motors with a diameter of 2mm (0.079”) and a minimum length of 3.8mm (0.150”). The encoders ...

Optoelectronics
16th July 2009
Miniature Half-Watt LED Package with High Lumen Output

Providing lighting design engineers with an LED source suitable for large or small, conventional or specialty lighting applications, TT electronics OPTEK Technology has developed a miniature half-watt LED package. Designated the OVS5MxBCR4 Series, the 3.5mm surface mount device is an energy-efficient LED source featuring high luminous intensity and a long operating lifespan.

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier