Compact, robust DIN rail-mounted PC with 7.2 GB flash memory

The DIN rail-mounted PC variant with 7.2 GB flash memory is based on the energy-saving Intel Atom processor Z530 (1.6 GHz) and the Intel US15W SCH System Controller hub with the Intel GMA 500 Graphics Media Accelerator. It also integrates a 1 GB DDR2 RAM in the Qseven module from MSC Vertriebs GmbH installed in the H1-A. To ensure optimum heat dissipation, the small 70 x 70 mm assembly unit is connected directly with the computer housing.

The application areas for the compact DIN rail-mounted PC are wide ranging. The robust computer can be deployed as gateway and communications system, Web server or distributed control unit in the process automation, plant control, power engineering, building automation, smart metering and electro-mobility. The standardized installation capabilities allow the system that is 90 mm high and only 41 mm (55 mm with cooling fins) deep to be installed very quickly in the electrical-equipment or switchgear cabinet. With a width of 124 mm (7 U), the industrial PC in the robust, high-quality aluminium housing can be installed under the rail-mounted standard cover.

The H1-A rail-mounted computer provides not only two fast 1000 Base-T LAN connections, but also two USB 2.0 ports and a serial RS232 interface. If required, a second RS232 can be implemented instead of the existing VGA interface. Like the 24 VDC power supply, the two RS485 ports are equipped with a plug connector with an insulation-piercing connection and are galvanically isolated to compensate for potential differences.

The DIN rail-mounted PC is designed for continuous reliable operation. The VGA interface can be used to connect a control monitor for commissioning and for maintenance purposes. The user data can be saved on the onboard flash memory or on an SD card.