Two RGB PowerLED modules, which are located in directly adjoining light wells, serve as the light source. The colour ratios are controlled via pulse width modulation. They can be set from the PC via a serial interface. The combination colours are respectively visible on a diffuser disc and can be directly compared (colour matched) with each other.
Both light wells are equipped with an MTCS-C2 module. Alongside the True Colour sensor MTCSiCS, this contains the programmable signal gain and processing as well as a USB interface. Each MTCS-C2 module includes the created combination colour on the diffuser surface of a light well. The measurement data is transferred via USB and visualised in two colour diagrams respectively on a PC. The chromaticity coordinate difference is also displayed.
In general, various colour temperatures can be set or any combination colours can be created / accidentally generated by means of an LED module. This colour specification is evaluated with an MTCS-C2 module and the adjoining LED module, which is evaluated with the second MTCS-C2 module, is readjusted with a suitable standard algorithm, until the chromaticity coordinate differences recorded by both MTCS-C2 modules correspond to a pre-defined minimum quality.