These stylish and ergonomic enclosures have a three-part design consisting of a top part, rear-facing front part and base panel, and are moulded in ABS (UL 94 HB) in off-white, RAL 9002. For ease of assembly, the case parts interlock and are secured by just two self-tapping screws. The external dimensions are 148 x 210 x 80/25 mm, and the cases can be specified with or without a battery compartment for three or five 1.5V AA cells.
Uniquely, the ‘UNITEC’ cases are available with optional recess depths on the operating faces of 0.6 mm for graphic labels, or 1.4 mm for membrane keypads. It is possible to have an all over graphics label, or mix labels with keypads on the same case.
‘UNITEC’ cases can be used for desktop or wall mounted applications. A simple to use wall-suspension element is available as an accessory, and allows the case to be mounted in different orientations.