The design allows users to programme LED current and timing to enable the safe overdriving of LEDs for increased brightness.
The design can operate autonomously but can also be triggered or generate a trigger through an isolated interface.
Internal circuit blocks support a wide input voltage range, a programmable input current, and input power control as well as protect against reverse polarity, overvoltage and overtemperature.
Features
- LED string voltage up to 24V
- Programmability of multiple parameters:
- LED current: 200mA to 2.4A
- LED mode: Continuous or pulsed 200ns to 4.9s
- LED pulse repetition: 0.2Hz to 10kHz
- Trigger delay time: 10μs for trigger input
- Multi-pulse time, and current bracketing to support AEB and HDR imaging
- Cascaded dual power stages:
- Pre-Boost: Wide 8 to 36V, 15W system input with adaptive inductor current limit
- Buck: Fast inductor current ramping
- Isolated trigger and UART interface:
- Isolated 5V, 50mA output
- Sinking NPN– and TTL trigger IN and OUT
- Comprehensive system supervision and protection:
- Onboard temperature sensors and voltage supervision
- Ultra-fast output overvoltage protection
- eFuse: Reverse protection, adaptive overcurrent limit, and input power limit
- EEPROM for up to 256 bits of user data
For more information, click here.
