These modules comply with ANSI C136.2-2015 Extreme, ANSI C82.77-5-2015 High Exposure, IEEE C62.41.2 Location Category C High Exposure, and US Dept. of Energy MSSLC Roadway Luminaire Elevated (20kV/10kA, 1.2/50μs-8/20μs) surge immunity standards.
A built-in thermal disconnect provides additional protection against catastrophic failure/fire hazard under varistor end-of-life or sustained overvoltage conditions.
Applications:
- Roadway, street and traffic lighting
- Parking garage lighting
- Wash wall lighting
- Digital signage
- Tunnel lighting
- Flood lighting
LSP10GIHP Series Surge Protection Modules provide robust surge protection for your outdoor/commercial LED lighting fixtures.
Features:
- Low measured limiting voltage (MLV) and low voltage protection level (Up)
- 20kA Maximum Discharge Current (Imax) 8/20µs
- Meets US Department of Energy Municipal Solid State Street Lighting Consortium Specification
- Meets ANSI C136.2-2015 Extreme Level and ANSIC82.77-5 Category C High (20kV, 10kA combination wave surge) requirements
- UL 1449 and IEC 61643-11/ EN 61643-11 approved
- Thermally protected
- Double-insulated cable wire
- IP66 rated
- Series-connected design with built-in LED indication
Click here to read more.