The power supplies of the series PM-IP67A of MTM Power allow the use as a “plug and play” solution directly on-the-site. This is only possible due to the connection via special 7/8″ connectors and the worldwide unique thermoselective vacuum encapsulation developed by MTM Power (EP 1 987 708, U.S. Patent No. 8,821,778 B2).
The series PM-IP67A200 is available with 24V single and dual output voltages and is certified acc. to the standards UL 60 950-1 and UL 508. The compact supplies with AC (90-264 VAC) and DC (100-300 VDC) wide input range are designed for worldwide use under extreme, environmental conditions and allow an efficient, cost-saving solution for different tasks in all on-machine applications.
As an option, units with 24VOUT are also available with variable current limiting designed to allow a short-time increase of the output power to 150%. This function, known as power boost, allows application on motors, capacitive loads, etc. which use to show difficult start-up characteristics. The outputs of the dual output version are galvanically separated with with 500 VAC isolation voltage and independently regulated; both output voltages offer Limited Power Source acc. to EN 60 950-1 and UL 1310, NEC class 2. The devices are certified according to protection degree 1 and comply with the Low Voltage Directive as well with the up-to-date EMC standards as regards CE conformity. The series PM-IP67A200 is constantly short circuit protected, needs no ground load and is operating within a temperature range of -25 to +60°C. Further features are rugged design, SMD-technology, automatic 100% final test and 100%-burn-in-test.