Multi-channel driver & inverter IPMs

  ON Semiconductor has further strengthened its portfolio of products for motor control applications with the introduction of two solutions, in A5.225 at electronica, for a variety of industrial, white goods and consumer applications.

The LV8714TA is an extremely energy efficient dual stepper motor driver with operating voltages ranging from 4 to 16.5 V. Featuring constant current control for its on-chip quad H-bridge channels, this device is capable of driving two stepper or four DC motors independently. The device’s power FETs with total on-state resistance of only 0.9Ω for one leg and synchronous rectification type switching allow its power consumption to be kept to a minimum while not in full operation. The device supports a low power saving mode with ultra-low standby current (less than 1µA) to minimise power consumption when in idle state. The proprietary internal current sense mechanism ensures loss-less current measurement without any external power resistor, thus enhancing the energy efficiency of the system solution.

On-chip regulators enable single supply operation of the device and lower the system solution footprint. Supporting an operating ambient temperature range of -20 to +85°C, the LV8714TA can cope with the most demanding needs of industrial environments. It has built-in thermal shutdown, low-voltage shutdown and over-current protection mechanisms that enable a highly reliable system solution. Among the wide variety of applications that this device addresses are security camera systems, point of sale (PoS) terminals, document scanners and multi-function printers.

The LV8714TA is offered in a 9x9mm 48-pin TQFP package and is priced at $2.99 each in 10,000 unit quantities.

Also being unveiled at electronic are the STK5Q4U352J-E and STK5Q4U362J-E 600V IPMs with an internal bootstrap circuit for high side gate drive. The IGBT/FRD modules are claimed to deliver a single control power supply due to the internal bootstrap circuit. All control inputs and status outputs are at low voltage levels, to make them directly compatible with widely-used system microcontrollers. Under-voltage protection and trip input for shutdown are included. Peak output current is 16A (STK5Q4U352J-E) and 20A (STK5Q4U362J-E). The compact, DIP modules for high voltage, three-phase motor drives can be used inair conditioning, industrial motor control, washing machine, dish washer and refrigerator designs.

The STK5Q4U352J-E and STK5Q4U362J-E are is offered in 18.2×29.6mm DIP modules, priced at $5.80 and $6.00, respectively, in 10,000 unit quantities.

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post

ON Semiconductor simplifies automotive lighting

Next Post

IRT device evaluation kit allows for prompt development