The digital to analog converters, available from Mouser Electronics, are high‑speed, high dynamic range dual DACs which permit multicarrier signal generation up to the desired Nyquist frequency. The converters specifically target wideband communications systems, automated test equipment, and high speed instrumentation.
A high performance, low noise phase lock loop (PLL) is on-chip to reduce component count. These DACs are designed for low power applications and draw 1.42Watts when converting at 1.6Gsps. An advanced low spurious and distortion design provides high quality generation of wideband signals, from the baseband up to high frequencies.
The devices are designed to easily connect with the Analog Devices’ ADRF6720 and ADRF670x analog quadrature modulators (AQMs). Interfacing to these DACs is provided by an industry standard SPI interface. This interface allows configuration of many of the device options, including internal reset, configuring the internal FIFO, selecting power down modes, setting interrupts, configuring the internal reference clock, configuring the internal PLL, and reading the internal device temperature.
Each DAC input channel also contains an 11/16-bit wide, 8-word deep FIFO. This FIFO acts as a buffer between the digital input data and the clocked analog output, allowing an asynchronous relationship between the input digital data and the output analog signal.