EDA-301 operates with 5.0 V external input or USB bus power. The EDA-301 provides 56 userI/Os, which are divided into two I/O banks. FTDI’s FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.
No download cable is needed with original configuration tool BBC [EDA-301].
HuMANDATA’s ACM/XCM series boards are designed on same PCB size and connector layout. So it is easy to swap the board to another one, and you can quicklytry a new FPGA/CPLD.
HuMANDATA’s EDA-301 is compliant with the RoHS Directive, and is designed for lead-free soldering.
Specifications:
– Altera Cyclone IV E (EP4CE15F17C8N)
– Configuration Device(Altera, EPCS16SI8N)
– USB controlIC (FTDI, FT2232H)
— FPGA Configuration
— Configuration device access (Write/Reset/Erase)
— User communication I/F
— Free original configuration Tool BBC [EDA-301]
– 50MHz Oscillator (50 ppm) or External inputs
– User Switch (Push x1,DIPx1bit)
– User LED x4
– Seven segment LED module x1
– Status LED (Power, Done)
– Power-on Reset
– JTAG Connector(10 pin socket) for download cable connection
– JTAG buffer for stable download or debug
– 5.0 V single power supply operation(External input or USB Bus power)
– High quality six layers PCB (Immersion gold)
– Compact size 2.087 x 2.126 (53 x 54 mm)
– ESD and Surge protection component for USB I/F
– Tested all I/O
– RoHS compliance
– Made in Japan