This unit consists of a basic meter and a 3-axis, E-field antenna. The meter is really an optimized spectrum analyzer covering 9 kHz – 6 GHz and modified to make accurate field strength readings. The 3-axis design covers 27 MHz – 3 GHz, calibrated at 20 different frequencies and reliably works down to 200 µV/m. Narda Safety Test Solutions also provides complete calibration information standard with every unit. This portable, rugged and splash-proof system incorporates a highly readable color display, GPS receiver and microphone for voice recording. Also supplied is the full SRM-TS software package, a 1.5 meter cable to separate the antenna from the meter and charger, manual and other accessories inside a protective carrying case.
The SRM-3006 has the ability to perform single or multiple measurements that can be averaged and/or stored in the meter for download to a computer. It can also be set-up to your liking and store a complete configuration for later or repeated use. Parameters can be set-up for time controlled storing that only logs the needed data above a certain threshold level. A GPS receiver and microphone also comes standard, allowing for storage of GPS coordinates and audio description.
The Narda SRM-3006 has been designed to perform the following RF safety, engineering and standard safety applications: safety evaluation, spectrum analysis, spatial averaging and level recording.
