The PCI-98×6 series combines three characteristics that make them optimized for various applications – high 16-bit accuracy, low noise, and high dynamic performance over wide range of frequency domain, making them ideal for applications such as radar/lidar design and test, ultrasonic imaging, non-destructive testing, spectral monitor, and automatic electronic testing.. For example, the typical dynamic performance for the PCI-9816 includes 12.6-bit effective number of bits (ENOBs) and a 78.4 dBc signal-to-noise ratio (SNR) at an input frequency of a 1 MHz sine wave.
For applications that need high-density channels in one system, the PCI-98×6 series provide a specially design system synchronization interface (SSI) to synchronize up to 4 cards. Each member of the PCI-98×6 series also includes up to 512 Mbytes of onboard memory for ample data storage to allow extended the acquisition times.
High dynamic range is one of the most import features for a digitizer, especially in IF signal acquisition applications, stated Catherine Wu, Senior Product Director at ADLINK. With the PCI-98×6 series of high resolution digitizers, customers will be able to measure very low-level signals in the presence of large signals, and thus increase the resolution and accuracy of the analysis of the results.
ADLINK provides both legacy drivers for program development in Microsoft C++ and Visual Basic and task-oriented drivers, such as DAQPilot, to accelerate the development cycle. The PCI-98×6 series of digitizers can also be configured and operated in NI® LabVIEW® by using DAQPilot’s Express VIs and Polymorphic VI.