The fundamental difference between the new 19-position APD connector and other devices in the APD connector family is the secondary contact locking mechanism, providing increased reliability. No special contact removal tool other than a “screwdriver” is required to unlock the secondary locking insert. This makes the new device very easy to assemble in the field. The APD 19-way connector also features an audible click when locked, along with up to four different key and colour codings to avoid mis-mating.
Meeting DIN72585 and above and IP69(K) requirements, the robust APD 19-way connector comes in plug, flange and jam nut designs. Supplemental accessories are available, including a straight and 90-degree endbell for shrouded/corrugated tubes, which can be used in all plug, flange and jam nut versions.
The 19-position APD connector features standard APK 16 contacts with a diameter of 0.25mm² to 1.5mm² (AWG 22-15) in either tin or gold plating – stamped and formed – as well as machined contacts. All wires are individually sealed, with optional end sealing available upon request. Maximum current is 48VDC and maximum current is 12A at 85 degrees Celsius. The device is designed for a very wide operating temperature range of -40 up to +125 degrees Celsius.
The design of the APD 19-way connector can be modified for use as a Canbus interconnection solution. A 27-way and customer specific versions are available upon request.
