Cables / Wires
SUYIN offers custom cable solutions
In many compact devices, space and design constraints make it impossible to place certain interface connectors at the end of the printed circuit board (PCB). Whether for USB, D-Sub, Modular, SATA, DC or other I/O connections – SUYIN offers custom cable solutions. This makes it possible to place the connectors anywhere within the enclosure and results in a flexible connection to the PCB. On the other end of the cable, there is a board-to-wire connector.
Disposable assemblies are cheaper to replace than sterilise
Now available from Quadrant are two ranges of circular connector cable assemblies that are designed specifically for medical instruments and are so inexpensive that is more cost-effective to discard them than sterilise with comparatively expensive autoclaving processes.
CHH CoNeX eyes aerospace success from Farnborough
Witton-based cable assembly, integrated products and logistics services provider, CHH CoNeX, has its sights set firmly on aerospace success following the company's involvement with the leading aerospace industry support programme, 21st Century Supply Chains (SC21), which celebrates its fourth birthday at Farnborough International Air Show this week (July 19-25).
Data cable assemblies for ISO/IEC 11801 Categories 5, 6 and 7
HARTING can now supply a range of cable assemblies for data transmission in ISO/IEC 11801 Categories 5, 6 and 7 for a range of environmental conditions.
New 26.5 GHz Coaxial Cable Assemblies from Crystek
Crystek has introduced the 190 Series CCK26.5 and CCSMA26.5 Cable Assemblies, new additions to their line of Low-Loss RF Coaxial Cables. Designed to operate up to 26.5GHz, the 190 Series CCK26.5 and CCSMA26.5 Cable Assemblies offer a minimum bend radius of 1.1 in. and are available in-stock with 2.92mm (K) and high frequency SMA connectors, featuring rugged stainless-steel solder-clamp construction and heavy-duty strain reliefs.
Advanced Cabling Solutions from Rittal
Handling fibre and the new 10 Gb/s augmented category 6 cabling in data centres is becoming significantly more difficult to deal with. With greater core diameters, which in turn cause larger bend radii, the enclosure is no longer a secondary consideration. Both the Rittal TS 8 and TE7000 range of enclosures provide advanced cable management such as gland plate modules with brush strip for cable entry, grooved cable routing panels and also fibre-optic shunting rings where strain relief and bend radii are guaranteed.
Radiall Introduces Medical Cable Assemblies and Interconnect Solutions for Patient Monitoring Equipment
Radiall introduces its new cost-effective ECG cable assemblies and SpO2 interface cables for OEMs that provide patient monitoring equipment in the global marketplace. In addition to the standard range, these cables and connectors can be customized and designed in a wide variety of cable, connector and contact, and yoke configurations in order to meet a customer's requirements.
FTDI offer enhanced range of USB 2.0 to serial UART converter cables
Future Technology Devices International Limited (FTDI) today announced the availability of their TTL-232RG family of USB to TTL serial UART converter cables. The TTL-232RG cables build upon the existing FTDI family of USB to TTL cables, by offering new versions to support an extended variety of voltage I/O levels. The cables feature a USB to serial converter PCB encapsulated within a standard type 'A' USB connector with a wire-ended asynchronous UART output. The cables are aimed at providing USB connectivity within applications with serial UART ports. The cables provide a fast and simple method for enabling USB connectivity in such applications, with minimal changes to existing user software.
Compact flash CFast connector and cover sets from ITT Interconnect Solutions
ITT Interconnect Solutions is supporting CFast - the latest small form factor removable storage standard to be released from the Compact Flash Association (CFA) - with a line of two-piece ultrasonic weld cover sets and 24 way connectors.
Zuken Launches Advanced Wire Harness Modeling and Simulation with Synopsys Saber
Zuken has introduced a new integration tool E³.Saber Frameway for Zuken's cable design software E³.cable. This allows engineers to create right-first-time robust wire harness, hydraulic and pneumatic designs, helping them overcome growing harness complexity and time/quality constraints through early access to virtual prototyping results.
Brand-Rex claims UK’s Number One spot
For the second consecutive year, Brand-Rex has been recognised by BSRIA as the UK's leader in the structured cabling market. The independent research organisation has highlighted this considerable achievement in its latest report covering sales during 2009.
Belden Introduces Video Coax Cables For SDI, HD-SDI, 1080p/50-60 And 3d-HD Applications
Belden announced Belden Brilliance 1794A Precision Video Coax Cable, the first cable designed specifically to meet the requirements of emerging 1080p/60 (in U.S.), 1080p/50 (in EU) 3 Gigabit applications.
40GHz Cable Assembly from Crystek
Crystek has introduced the CCK40 Series Cable Assembly, a new addition to their line of Low-Loss RF coaxial cable assemblies. Designed to operate up to 40GHz, the CCK40 features rugged stainless-steel solder-clamp construction and heavy duty strain reliefs. This low-loss cable provides an attenuation value of 0.90dB/ft. at 40GHz. The CCK40 Series cable offers shielding effectiveness of greater than -90dB with an operating temperature range of -55 to +85ºC (extended range of -55 to +125ºC available through special order).
Volex Consumer Products Division Delivers Next Generation Environmentally-Friendly Cable Assemblies
Volex continues to apply its industry experience and technical expertise to maintain a leading share of the global power cords market and present the next generation of environmentally-conscious products, including halogen-free and phthalate-free cables.
Fire Survival Fibre-optic Cable For Mission-critical Areas
A new range of fire survival fibre-optic cable is now available from the AMP NETCONNECT business unit of Tyco Electronics.
HCD to highlight new cable assembly and box build services at National Electronics Week
HCD, the Letchworth-based contract electronics manufacturer, will focus on new services at the National Electronics Week exhibition, Birmingham NEC, 18-19th May. Recently the company has announced a cable assembly facility and box-build capability, in addition to its core CEM and PCB design activities.
Molex high performance LC2+ Metallic Optical Connector for harsh environments
Molex announced the new LC2+ optical interconnect product line. The latest offering by Molex for high-density harsh environment optical applications, the LC2+ optical interconnect is a metal connector body and latch version of the popular LC connector system.
Oki Electric Cable Introduces New Wire for Wire-type Electrical Discharge Machine (EDM) to Achieve 30% Faster Cutting Speed
OKI Electric Cable announced the launch of OS-UZ Wire, a zinc-plated wire for Wire-type EDM. Sales and shipment of OS-UZ Wire starts in April. Featuring a unique four-layer structure for high-cutting speed and smooth cut surface, the new OS-UZ Wire was developed to meet the needs of the metal parts industries and die & mold industries. OS-UZ Wire will improve manufacturing productivity, reduce wire consumption, and cut machine operation costs.
New Line Of Low-loss RF Coaxial Cable Assemblies
Crystek has introduced a new line of low-loss RF coaxial cable assemblies featuring rugged stainless-steel solder-clamp construction and attenuation of 0.36 dB/ft. at 18 GHz. The LL142 Series cable offers shielding effectiveness of greater than -110 dB with an operating temperature range of -55 to +85ºC (extended range of -55 to +125ºC available through special order).
Prysmian at the heart of the matter in Italy
Prysmian Telecom Cables and Systems announced the first deployment of its Sirocco, blown optical fibre system, in Italy. The installation has been carried out at the ELETTRA research facility in Basovizza near Trieste, in the north-east of the country. ELETTRA is an advanced synchrotron light laboratory, run by Sincrotrone Trieste S.C.p.A. It specializes in fundamental studies of sub-atomic matter using its third generation synchrotron particle accelerator. The fourth generation light source Fermi@Elettra is currently under commissioning and will allow advanced research to be undertaken in several fields of matter structure.
Omron adds European cabling capability
Omron announced that it has introduced a Europe-based cable harnessing capability covering its range of top quality relay, switch and connector products. With the introduction of local assembly for harnesses in Europe, Omron can offer fast turnaround on samples, and produce volume quantities competitively to the relevant European standards. The Omron harnesses are manufactured in Europe at an ISO9000 and TS16949 accredited facility, and meet the relevant European standards for wire harnessing and connectors.
Lane Electronics - ENVIROFLEX Co-Axial Cable is good for the environment
Lane Electronics, one of the UK's leading interconnection specialists, announced the immediate availability of an environmentally-friendly co-axial cable. Called ENVIROFLEX, the cable is manufactured by HUBER+SUHNER and is a direct replacement for standard RG co-axial cables that contain halogen and in the case of fire produce highly toxic corrosive gases.
New Phase Master Cable from Teledyne Reynolds, UK
Teledyne Reynolds UK, in conjunction with the Teledyne Electronics and Communications European Sales Team have launched the Teledyne Storm Phase Master 190E (Enhanced) coaxial cable. This cable, designed for 26.5 GHz, incorporates high levels of shielding to give exceptional phase stability over temperature and flexure. Stability over temperature is less than 500 ppm in the range of -55° to +85°C. Stability with flexure is 1 degree at 18 GHz. The new cable design incorporates torsion resistance and connector retention in excess of 20 kgs straight pull with an SMA connector. Applications include active scan radars, electronic warfare systems, wireless and communications & test and measurement probe cables.
Emergency One puts out the fire with Zuken’s E³.series
Specialist fire rescue and emergency vehicle manufacturer Emergency One UK Ltd has selected Zuken's E³.series software for its electrical harness design. This will enable the company to produce wire harnesses to standardize and reap the cost and reliability benefits, while also delivering flexibility through modular based customization to aid the manufacturing process and enable straightforward retrofit options.
New € 4.5 million contract by STX Europe for the cabling of “Allure of the Seas”
"Oasis of the Seas", the largest and most revolutionary cruise liner in history, built by the international shipbuilding group STX Europe for Royal Caribbean Cruises Ltd., has been unveiled in Florida, USA. Prysmian Cables & Systems has been the only supplier of approximately 5,000 km of energy and telecommunications shipboard cables.
New Socapex Cable for Eland portfolio
Eland's stock profile continues to grow following the introduction of Socapex Control Cable to its product portfolio.
Fischer Alulite Connectors can withstand harsh conditions
Available in a wide range of colors, from bright to camouflage shades, the Fischer AluLite connectors easily integrate with your product design, while also offering a flexible color-coding system. Rugged, 360° EMC shielded, sealed up to IP68 (2m/24h) or even hermetic, they can withstand harsh conditions. Ideal for frequent connect / disconnect operations, the plugs and receptacles are engineered to endure more than 5,000 mating cycles within a temperature range of -50°C to +150°C. Additionally, the anodized finished connector housing is engineered with an aluminium alloy specifically chosen for its anticorrosion property.
Belden 3600 Pre-Terminated “Green” Cabling System Reduces Installation Time and Costs, Provides Reliable Category 6 Performance
Belden introduces the new Belden 3600 Pre-Terminated Cabling System. Belden's eco-friendly Pre-Term Made Easy cabling solution delivers robust and reliable Category 6 performance, making it ideal for installation in data centers and office environments.
Igus - Cables for cranes and other demanding applications
igus has introduced a new range of products for port cranes at the TOC Europe in Bremen. The aims are to improve technique, increase lifetime whilst saving costs. The "P4" energy chain system which has been around for about one and a half years now, is available in two new sizes: P4.32 and P4.42. The P4.42 (42 mm inner height) in a "heavy-duty design" is made for particularly demanding crane applications: high speeds up to 10 m/s, long travels up to 800 m, high filling weights up to 10 kg/m. In contrast the P4.32 (32 mm inner height) has been developed in a new design – lighter and slimmer – for high speeds when the installation space is limited.
Bryant Broadcast - Cost-effective fibre HDTV Camera cables designed to compete with lower cost imports
Bryant Broadcast's commercial grade composite SMPTE 311M, single-mode fibre optic and copper composite camera cables can multiplex audio and video signals and power and are manufactured using Furukawa TV-OM-AMS SMPTE specification cable, terminated with Lemo SMPTE 304M connectors.
High-Performance Coaxial Cable Assemblies
A low-loss and interference-free signal transfer according to IEEE 802.11a/b/g (in the frequency range of 2.0 GHz up to 6.0 GHz) depends on high-quality material and on perfectly aligned and well-finished coaxial cable/connector combinations. SUYIN, the Taiwanese specialist for connectors and cables, has specialized on the assembly of coaxial cables for diverse requirements and applications. The company offers a wide range of coaxial cables with diameters of 0.8mm, 1.13mm, 1.32mm and 1.37mm in various lengths providing a great variety of high-frequency plugs and jacks like F/J, MCX, MMCX, MHF, SMB, CA-F/UFL, PAL, SMB and IEC types.
Solar power cable from Multi-Contact lasts 25+ years
Multi-Contact has introduced its new FLEX-SOL-XL cable for solar power applications. The single-pole, double insulated cable has been developed for heavy duty, low voltage, outdoor or indoor wiring and has an expected usable lifetime in photovoltaic (PV) applications of 25 years or more.
Pre-terminated copper cabling solutions for office networks and data centres
The Sigma-Link system from the AMP NETCONNECT Business Unit of Tyco Electronics is a range of pre-terminated high-speed copper cabling solutions designed for ease of installation in office networks and data centres.
NFPA compliant power chain cable from Lapp is a must for exporters to the United States
Lapp Group has announced key additions to its ÖLFLEX range of high performance cables. The ÖLFLEX CHAIN 879 and the screened CHAIN 879 CY cables are UL-listed high flexibility power chain cables that meet the NFPA 79 standard currently required by all machine manufacturers exporting to the USA.
Tyco Electronics introduces 40 Gb/s active optical cable assemblies
Tyco Electronics has announced the introduction of its new 40 Gb/s Quad Data Rate (QDR) speed PARALIGHT cable assemblies in a Quad Small Form-factor Pluggable (QSFP) connector format. This new cable assembly can run up to 100 meters, although longer lengths may be possible and are being evaluated.
NFPA 79-conforming cables for energy chains
For those who want to export machines and plant to the USA, there is often no way around the requirement for the new NFPA 79 approval. This standard, which originated in the construction field, prohibits the use of some AWM cables (UL Recognized) in machines. Due to the very high fire-resistance requirement, NFPA 79 restricts the selection of cable materials used to PVC only.
Cable assemblies of all types from Yamaichi Electronics
With years of experience in the development and sale of standard and customised connectors, test & burn-in sockets and test contactors, Yamaichi Electronics has now reinforced its commitment for the small-to-medium sized cable assembly business.
Hybrid PROFINET cabling from Harting simplifies installation
HARTING has introduced a new range of hybrid PROFINET cables which combine PROFINET data and 24 V power distribution in a single cable for ease of installation and enhanced reliability. The new hybrid cables are ideal for use with the HARTING PROFINET Han 3A RJ45 connector family.
Alpha Wire Extends Smaller Gauge Xtra‐Guard Cable Range
Alpha Wire has announced that it is extending the Xtra‐Guard family of performance cables with the introduction of smaller, new 26 AWG (0.14 mm2) and 28 AWG (0.09 mm2) stranded conductors. Smaller gauge conductors help reduce the overall cable diameter, delivering improved flexibility, and increasing compatibility with today's smaller connectors whilst maintaining the high performance and system reliability for which Xtra‐Guard is known.
Lapp’s custom cables used in painting robot systems
As the manufacturer behind powerful international cable brands such as ÖLFLEX flexible control cables, EPIC industrial connectors and SKINTOP cable glands, the Lapp Group has solutions for almost every application, from mechanical engineering, automation, and robotics, to building services and data transmission. In addition to a comprehensive range of standard products, Lapp will work with a customer to develop cabling products that exactly match the requirements of their application. Here, Lapp's Matt Ansell describes cables that Lapp has developed specifically for the Stuttgart based Dürr Group's industry leading paint systems.
Page 1 2






