Test & Measurement

Displaying 291 - 3461 of 3171

Triggering and decoding option enhances oscilloscopes

Triggering and decoding option enhances oscilloscopes
Rohde & Schwarz has introduced the RTO-K60 option to support developers involved in designing, verifying and debugging modules with USB interfaces. It enables the R&S RTO oscilloscope to trigger on USB 1.0, 1.1, 2.0 and HSIC-specific protocol data, decode the acquired waveforms and display the protocol content in an easy-to-read format. The hardware-supported trigger implementation of the R&S RTO provides high acquisition rates and minimal blind times.
2nd October 2014

Agile signal generator undertakes complex simulations

Agile signal generator undertakes complex simulations
The N5193A UXG agile signal generator from Keysight Technologies is an off-the-shelf instrument that enables highly realistic and scalable threat simulations for aerospace/defense applications. It is also a dependable slide-in replacement for the legacy fast-switching local oscillators (LOs) often used in large, dedicated simulation systems.
1st October 2014

Field analyser integrates PIM and line sweep testing

Field analyser integrates PIM and line sweep testing
Anritsu says it is breaking new ground in field wireless test with the introduction of the MW82119B PIM Master, which combines a 40W, battery-operated PIM analyser with a 2 MHz to 3 GHz cable and antenna analyser, eliminating the need to carry multiple instruments to measure the RF performance of a cell site.
1st October 2014


DDR bus simulator addresses Bit Error Rate challenge

Keysight Technologies has introduced the DDR Bus Simulator; a tool that generates accurate Bit-Error-Rate (BER) contours for the JEDEC DDR memory bus specification. The software product, which is available as a new option for Advanced Design System (ADS) 2014.11 from Keysight EEsof EDA, quickly and accurately calculates DQ and DQS eye probability density distributions and BER contours for memory interfaces.
1st October 2014

Exposure meter eases electromagnetic compliance

Exposure meter eases electromagnetic compliance
Link Microtek has introduced a new hand-held instrument that provides health and safety professionals with an easy means of proving compliance with Directive 2013/35/EU, which deals with electromagnetic fields in the workplace and will come into force in July 2016. Manufactured by Narda Safety Test Solutions, the ELT-400 Model 107 exposure level tester is as straightforward to operate as a noise meter, displaying magnetic field strengths as a percentage of the High, Low and Limb Action Levels defined in the EMF directive.
1st October 2014

Test integration validates software execution behaviour

Vector Software is offering an integration between the VectorCAST test solution and the Esterel SCADE Suite LifeCycle Qualified Testing Environment (QTE). Engineers using the tool chain can integrate model-based application development with the SCADE Suite, and automatically generate the target test environment and supporting test cases using VectorCAST — providing an on-target testing capability which validates that the software execution behaves as expected.
1st October 2014

Metrology system analyses semiconductor packaging

Metrology system analyses semiconductor packaging
Advantest has a new mold thickness metrology system, the TS9000, for measuring the thickness of semiconductor packaging. The system is based on advances in Terahertz (THz) technology pioneered by Advantest. The TS9000 Mold Thickness Analysis (MTA) System is a new metrology tool that performs non-destructive analysis of the thickness of semiconductor packaging.
1st October 2014

Motor drive power analysis software upgrades oscilloscopes

Motor drive power analysis software upgrades oscilloscopes
Teledyne LeCroy has introduced three-phase Motor Drive Power Analyser software for its HDO8000 oscilloscopes. The HDO8000 mixed-signal oscilloscopes, with 8 input channels, 12-bit resolution, and up to 1 GHz bandwidth, enable motor drive embedded control and power section debug.
29th September 2014

IoT, 5G, smart grid headline at NIDays 2014

The Internet of Things, 5G and Industrie 4.0 and the smart grid are all on the agenda for National Instruments UK & Ireland NIDays 2014, the annual Graphical System Design Conference for engineers, scientists and educators.  The event will be staged at The Queen Elizabeth II Conference Centre, Westminster, London on Tuesday November 4.
29th September 2014

Companies unite to extend Zigbee test services

DEKRA has entered into a cooperation agreement with TRaC Global, a Zigbee Alliance Certified test laboratory in the UK. The new partnership will enable DEKRA to call on TRaC Global for ZigBee certification purposes, while TRaC Global will be able to extend its testing services in the field of electrical safety via DEKRA.
29th September 2014


Test & Measurement documents


Network Headlines

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer