1160-D2 Pittsford-Victor Road
Pittsford
NY 14534
United States of America
Phone
+001(585) 385-1750
Fax
+001 (585) 385-1768
Web Address
http://www.saelig.com
Saelig Company Inc Company Details
Saelig Announce 6GHz Counter-Timer With Low Cost And High Resolution
Saelig unveil an economical 6GHz bench/portable frequency counter, the TF960. It features a high quality temperature compensated internal frequency reference which has a low ageing rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery powered conditions.
Saelig launch QPX1200SP PowerFlex LXI Benchtop Power Supply
Saelig launches the QPX1200SP - a 1.2kW DC bench-top power supply featuring PowerFlex regulation, designed to meet the need for flexibility in the choice of voltage and current. It offers voltage and current combinations for a very wide range of applications between 60V/20A and 20V/50A. The QPX1200SP includes a linear output stage within its PowerFlex regulator, which gives it a very low output noise of less than 3 mV rms, and a transient recovery time typically ten times better than conventional switch mode units.
Saelig announces the JTAGMaster universal PLD test system
Saelig Company has introduced the JTAGMaster Tester/Programmer, an integrated solution for testing and configuring Programmable Logic Devices. JTAGMaster can perform boundary scan IC and board tests, as well as programming JTAG-compatible IC and EEPROMs using external adapters.
Saelig Introduces Affordable Ready-To-Run 3D Printer
Saelig has introduced the award-winning Afinia H479 Rapid-Prototyping 3D Printer - a self-contained unit that provides an immediate availability 3D prototyping experience. The H479 3D Printer comes fully assembled, with easy to install software for both the PC and Mac, and can prototype a part up to 5 inches in each dimension, accurate to within .2mm (.008). A heated build platform prevents model warping during printing.
PC-Based Universal PCB Test System Announced By Saelig
Saelig announce the System 8 Diagnostic Solution Plus - a unique, versatile, easy-to-use PCB test system that uses a selection of CD-drive-size modules to create a PC-driven PCB test station. The System 8 Diagnostic Solution Plus, which can be built in a PC case or 19 rack-mounted, is based on a comprehensive set of test instruments for complete testing and fault-finding needs on almost any kind of PCB.
Saelig Debuts New Low-cost High Power USB Inspection Microscope/Magnifier
Saelig have today unveiled the MV600UM2 USB Inspection Microscope - an easy-to-use color digital microscope with a USB interface and magnification up to 600X. It breaks the mold of traditional microscopes by providing an integrated 2.0 MP digital/video camera and adding simple-to-use PC functions for measurement and image transfer.
Saelig unveil the BT-168D Battery Tester
Saelig have unveiled the BT-168D Battery Tester, which is an ideal toolbox companion for reading the output voltage level of any 1.5v or 9v battery. Featuring sturdy construction and an easy-to-read digital LCD display, the BT-168D has an adjustable sliding arm for contacting the terminals of different size of batteries - even miniature coin cells.
Saelig Announces 'LOG Storm' High-speed Digital Data Logger - with extended recording capacity and data filtering capability
Saelig Company, Inc. has introduced LOG Storm, a new high-speed digital data logger for troubleshooting digital system buses. LOG Storm contains an 8 MSample memory buffer, enabling large bursts of data up to 20bits at 100 MHz to be sampled. A USB connection is used to stream collected data to the PC, enabling Gigabytes of data storage. LOG Storm's most useful feature is its data filtering capability, efficiently storing only relevant data.
Saelig's New Range of PCIe Digital I/O Cards
Saelig Company, Inc. announces the launch of the newest addition to its digital I/O data aquisition product range, the PCIe-200 series. These new high performance PCIe-format digital I/O data acquisition cards implement the high-bandwidth advantage of the PCI Express x1 interface for large scale data transfer, low latency, and low power consumption.
Saelig Debuts Unique Circuit Track Current Probe
Saelig Company, Inc. announces the Aim-TTi I-Prober 520, a unique, compact hand-held current probe for use with any oscilloscope, unlike any other current measurement device available. The current flowing in a pcb track can be observed and measured, allowing measurements by merely placing the insulated tip of the probe on to the track.
Saelig's New Fault Tracker Detects Problems in Complicated Electrical Control Systems
Saelig Company, Inc. has introduced FTR-Birdie - a simple to use, self-contained electrical test and fault-finding logger which records and displays all on/off voltage changes at its 16 inputs. Applications include monitoring, logging, and fault finding for control systems, security systems, heating and ventilation systems, production machinery, lift control gear, etc.
Saelig Debuts New Affordable Prototyping 3D Printer
Saelig Company, Inc. announces the availability of the Replicator, an affordable, personal 3D printer offering 1- or 2-color printing of solid objects. The Replicator runs open-source 3D-printing code and is compact enough to fit on a desktop. Ready within minutes to start printing right out of the box, The Replicator fabricator turns raw feedstock, such ABS or PLA, into instant prototypes as large as a loaf of bread.
Saelig Introduces Novel Electric Potential Sensor for Non-contact ECG and Gesture Measurements
Saelig Company, Inc. announces the availability of the EPIC Sensor (Electric Potential Integrated Circuit), a new, innovative game-changing electric field sensor. This completely new sensor technology measures electric field changes without requiring physical or resistive contact. EPIC is an award winning, patent-protected sensor that can rapidly measure electric potential sources such as electrophysiological signals or spatial electric fields.
Saelig Company, Inc. and Tabor Electronics Announce New Distributorship Agreement in the United States
Saelig Company, Inc. and Tabor Electronics has announced that, effective immediately, Saelig Company. Inc. is appointed as an authorized distributor of selected Tabor-branded products for North America. Saelig has 23 years' experience in finding unique products to introduce to the North American marketplace, offering a wide range of sales, support, marketing, and technical services in the United States for more than one hundred manufacturers worldwide.
Saelig Introduces USB-powered 5GSa/s Digitizer
Saelig Company, Inc. has introduced the PS6407 - a USB-connected high-speed digitizer which provides very fast data capture for industrial and scientific applications. With four 1 GHz 50-ohm analog inputs and a 5 GS/s real-time sampling rate, The PS6407 can handle a wide variety of signals such as: high-speed serial data; automated test rig waveforms; high-frequency circuit designs; radio, laser and radar IF signals; and many other types of rapid experimental data. The PS6407's 1 Gigasample memory buffer allows high-speed capture of very long data records, while the USB streaming mode allows for continuous capture of unlimited amounts of data at up to 13 MSa/s. The PS6407 can digitize a 1 GHz sine wave with a timing resolution of 200 ps.
Fast-Sweep RF Signal Generator From Saelig
Saelig Company, Inc. has introduced theTGR6000 - a new, economically-priced 6GHz RF signal generator that is both simple and intuitive to use. The TGR6000 offers a high purity output with low phase noise over a frequency range of 10MHz to 6,000MHz, with output from -110dBm to +7dBm adjustable in 0.1dB steps. The frequency resolution is 10Hz and the internal time-base stability is better than 1ppm. An external reference can be used where even higher accuracy is required. User level compensation tables can be loaded in order to calibrate an entire test set up.
Saelig Debuts New Modular C-programmable Control System
Saelig Company, Inc. announces MOACON - a new, programmable modular industrial control system. Its mix-and-match design enables customers to select and assemble just the modules needed for a specific requirement, while providing adaptability for future change.
Saelig - Low-cost 60MHz Oscilloscope With Deep Memory
Saelig Company, Inc. announces the SDS6062 - a new, two-channel benchtop scope with a huge 10MSa record length for each channel, allowing zooming capability for investigating fast, intermittent pulses. This low-cost versatile scope samples at 500MSa/s and is packed with useful features normally only seen on higher-end DSOs, including deep memory, external, video-capable trigger, auto-measurements, auto-scaling, large 8 full color LCD display, XY mode, auto-set, averaging, math functions, USB output, waveform storage, pass/fail output and a 3-year warranty. Even FFT functionality is included for frequency spectrum display. The SDS6062 comes in a sleek, slim case and can even be fitted with an optional battery, ideal for field or isolated operation.
Saelig - Surface-mount HCSL Oscillators Targeting Volume Applications
Saelig Company, Inc. has introduced a new range of surface-mount high-speed current steering logic (HCSL) oscillators designed for volume applications. The new HCK5361 and HCK5761 differential HCSL oscillators are highly competitive and deliver higher frequencies compared with surface acoustic wave (SAW)-based oscillator designs. The new parts offer jitter performance of less than 1ps (12kHz to 20MHz), an operating temperature range of -40 to +85°C and provide low aging.
Saelig launches 100MHz Handheld Oscilloscope
Saelig Company's HDS3102MN is a 100MHz two-channel handheld oscilloscope and 3¾ digit multimeter with FFT spectrum display capability and is perfect for any engineer's toolkit. A USB connection makes storing or printing the displayed waveforms easy too. HDS3102MN features a rugged impact resistant casing, easy- to-use controls, and a high-brightness 640×480 LCD display. Battery life is an exceptional 6 hours.
Saelig's Miniature 10MHz Scope Adapter Offers Signal Isolation
Saelig Company, Inc. has introduced USBscope50 - possibly the world's smallest USB DSO (Digital Storage Oscilloscope). USBscope50 combines a very small form factor - similar to a memory stick - with the high performance normally associated with much larger bench-type products. Powered from a USB port, USBscope50's modular design allows the user to configure a single channel or up to 4 channels when using multiple adapters. A proprietary synchronization system insures tight signal channel-to-channel matching and concurrent triggering. USBscope50 is small enough to be carried in a shirt pocket or laptop bag and uses standard BNC oscilloscope probes.
Saelig Introduces Rugged Puck Antennas for Indoor/Outdoor Wireless Use
Saelig Company, Inc. announces the tough new CP range of antennas based on a common rubberized low- profile puck design with a built-in central threaded mount. All CP antennas offer 2-3 dBi gain for linearly polarized signals and are ground-plane independent. Compact (102 x 33.5mm) CP antennas are 1/2 wave radiating elements have a power rating 10W and are supplied with 1 - 3m of cable terminated with an SMA male connector. CP antennas are screw-mounted, requiring a 20mm hole. The cable exits on the underside of the antenna and, once mounted, is totally enclosed, secure, and waterproof, held in place by a flanged nut that is tightened from underneath.
Saelig's SD Adapter Makes Cellphones/PDAs Compatible with USB Memory Devices
Mobidapter, newly introduced by Saelig Company, Inc. , is a USB memory stick reader which plugs directly into the SD memory slot on mobile/cell phones, smart phones and PDAs, permitting - for the first time - reliable, rapid transfer of files from USB sources. Just insert Mobidapter to a phone's SD slot, connect it to a USB memory device, and - in an instant - text files, images, PowerPoint files, can be e-mailed. Now files can be transferred anywhere - without a PC - in all operating systems since no drivers are required.
Saelig Debuts New features for Low-cost Oscilloscope
Saelig Company, Inc. announces new features for the PDS5022S low-cost, full-featured 25MHz two-channel benchtop oscilloscope. The new features are: Auto-scale, FFT, and trigger hold, normally found on much more expensive instruments.
Saelig's W7100 – New Embedded-Internet 8051 MCU
Saelig Company announced the W7100, a one-chip solution which integrates an 8051-compatible microcontroller, 64KB SRAM and hardwired 10BaseT/100BaseTX + PHY for high performance and easy development. Targeted at designs for network-enabled instruments and dataloggers, the W7100 provides 32 Kbytes of internal buffer for data transmission/receiving, and supports half-duplex/full duplex, auto-negotiation and auto MDI/MDIX. It can also drive 6 network LEDs for Link, TX, RX, Collision, Speed and Duplex for status indication.
Saelig - Bio-Acoustic Solar-powered Bird Dispersal Device
Saelig Company has launched the COMPACT range - the very latest innovation in field-proven professional bio-acoustic technology for ridding agricultural, building and public places of bird nuisances. The new COMPACT 1313 is completely portable, providing up to 360 degree dispersal with the additional benefit of solar power capability to allow independence from all external power supplies, with zero ongoing utility cost.
Saelig Introduces Powerful USB Embedded Development Tool
Saelig announced the availability of GP-24100 - a PC-controlled USB 2.0 high speed device featuring ADWG (Arbitrary Digital Waveform Generator), and logic analyzer capabilities. It enables the stimulation and analysis of digital interfaces, streaming data to/from a PC to 16 data lines at up to 10MHz, with 6 additional control lines for repetitive sequence generation, in/out clocking or trigger definition. Electronic engineers now have an easy-to-use tool to access electronic systems from their favorite workstation,offering a significant productivity gain for system-on-board development.
Saelig Debuts GTO – GUI Software Speeds PCB Assembly Design Verification
Saelig Company, Inc. announces the availability of GTO, - an easy-to-use Graphical User Interface tool, expressly designed to help rework technicians, assembly technicians, and printed circuit board assembly contract manufacturers to easily locate single or multiple components on a PCB.
Saelig Introduces AnyWhere Solar Lighting
Saelig Company, Inc has announced the availability of AnyWhere Solar Lighting - a new weather-proof lighting product developed for use in off-grid solar applications. AnyWhere Lighting Kits have built-in energy storage and management, eliminating the need for a separate battery and controller in a solar home system installation.
GUI Software Speeds PCB Assembly Design Verification
Saelig Company, Inc. announces the availability of GTO, - an easy-to-use Graphical User Interface (GUI) tool, expressly designed to help rework technicians, assembly technicians, and printed circuit board (PCB) assembly contract manufacturers to easily locate single or multiple components on a PCB.
