|
Search
Useful Links  |
Cooling Products
Orion Fans 10-inch AC FansOrion Fans, a division of Knight Electronics and a leading manufacturer of standard and custom AC and DC fans, fan trays and accessories, has experienced extensive growth with its 10-inch AC fans designed specifically to move a large amount of air through confined spaces. Designated the OA254 Series, the AC fans measure 254mm x 89mm (10" x 3.5") and feature airflow of 547 CFM on the standard model and up to 850 CFM on the XC high performance model. Ideal for applications involving confined spaces including rack and panel and cabinet enclosures, these fans produce a significant amount of backpressure at the high CFM rating. New standard size for industrial displays from SharpThe 16:9 format 7 inch diagonal screen is emerging as the new standard for numerous portable test, measurement and input devices spanning all industrial sectors - logistics, transport, medicine, vehicle manufacturing and repair, the hotel trade and catering, etc - and various consumer applications such as pocket PCs, media players and electronic picture frames. 
Sunon SG series high airflow fan saves up to 51% powerSunon has developed the latest generation of the 40mm x 40mm x 28mm Super Green Fan (SG4028). The design of the Super Green Fan features high efficiency, low power consumption, low vibration and low noise. Dedicated to low energy use, Sunon's sealed-motor technology raises the air flow and increases the air volume by 10 per cent. 
Black Heatsinks Enhance Thermal PerformanceIntent on capitalizing on the success of their W Series heatsinks which utilize a clever attachment scheme while remaining competitively priced, Ohmite have introduced black anodized versions which when used in still air, will give customers as much as a 30% increase in thermal performance. 
Nextreme Demonstrates Laser Cooling For TO-Can PackagesNextreme Thermal Solutions, the leader in microscale thermal and power management products for the electronics industry, today announced the cooling of a laser diode in a TO-8 package using an embedded thin-film thermoelectric OptoCooler HV14 module. Cooling the laser improves the output performance and reliability of the device. 
Sealed Sleeve Fans Cost 30-50% Less Than Ball-Bearing FansOrion Fans, a division of Knight Electronics and a manufacturer of standard and custom AC and DC fans, fan trays and accessories, offers sealed sleeve DC fans at a cost 30-50% lower than comparable ball-bearing fans. The Challenger Series fans also feature an L10 life expectancy of more than 50,000 hours, equating to nearly twice the life expectancy of standard sleeve bearing products. Laird Technologies Releases the Newest in a Series of Thermal Management Application NotesLaird Technologies today announced the release of its newest application note titled "Thermoelectric Assemblies for Food and Beverage Applications". This application note is the newest in a series of notes describing the role of Thermal Management in numerous market segments. 
Low Profile Heat Sinks Cool Hot Components In Constricted PackagesAdvanced Thermal Solutions introduced a line of lower height maxiFLOW heat sinks for cooling ICs and other hot components in narrow packaging and low airflow velocity conditions. The maxiFLOW heat sinks feature a spread fin array that maximizes surface area for more effective convection (air) cooling. Standard sink heights are as low as 9.5 mm. 
Award Winning Thermoelectric CoolerRittal's thermoelectric coolers employ the "Peltier Effect" to provide 100 W of cooling output without refrigerants or gases and with very few moving parts. This is achieved by passing an electric charge through a two dissimilar conductors which, as discovered by 19th Century physicist Jean-Charles Peltier, lowers the temperature of the "Peltier element." Fans are then used to circulate the cool air. 
Orion Fans Delivers Comprehensive Line Of Fan Accessories Including Cords, Filters And GuardsDallas-based Orion Fans, a division of Knight Electronics and a leading manufacturer of standard and custom AC and DC fans, offers a comprehensive line of fan accessories. Orion's fan accessories include steel wire and wire mesh finger guards, filter kits and plastic guards, fan cords and daisy chains, and 3-conductor and custom AC power cords. 
Cool Innovations - Integrated fansink in copper and aluminumCool Innovations Inc. today introduced a new line of integrated fansinks. Available in copper and aluminum, integrated fansinks are composed of a pin fin heat sink and a fan that is embedded into the heat sink's pin array. This unique configuration allows for the creation of extremely low profile active cooling solutions. 
New low-vibration fans from Aerco reduce risk of hard drive crashesNew from Aerco is a range of Delta low-vibration fans designed specifically for cooling 19", 1U, rack-mounted servers addressing the three common problems associated with cooling modern, high-performance boards: air flow, vibration and energy consumption. Revolutionary technology for a traditional fan design that ensures a high air volume at a low noise levelSunon introduces the new cellular AC fan. The new AC Alveorate motor supplies a high air volume with a low noise level, a system of reducing the temperature and two-speed operation. 
Ultra-Low Silicone Thermal Gap Filler Provides High Thermal Conductivity and ConformabilityMH&W International has added new TP-S3LS ultra-low silicone gap fillers to its line of thermal interface materials. TP-S3LS pads contain less than 50 parts per million of silicone while providing 3.0 W/mK of themal conductivity between hot components and their heat sinks. The gap filler's minimal silicone content makes it suitable for use in silicone-sensitive applications including medical electronics, laser optics and telecommunications where silicone-based outgassing can lead to contamination and condensation issues or leave oily residues that interfere with process applications. The TP-S3 family of materials was developed by Chang Sung Corp. and is manufactured by Dongyun Electronics in South Korea. Laird Technologies Releases the Third in a Series of Thermal Management Application NotesLaird Technologies has announced the release of its newest application note titled "Thermoelectric Assemblies and Modules for Industrial Applications". This application note is the third in a series of notes describing the role of Thermal Management in numerous market segments. 
Orion's Fans for Telecom, Networking EquipmentDallas-based Orion Fans, a division of Knight Electronics and a leading manufacturer of standard and custom AC and DC fans, now offers a family of high performance DC fans for electronic enclosures, telecommunications and networking equipment. The VA Series fans maximize airflow in nearly sealed, exceptionally high static pressure environments. 
Rittal fan and filter units dissipate heat cost effectivelyFan and filter units from Rittal, with airflows from 20m³/h to 700m³/h and IP ratings up to IP56, are ideal for dissipating heat loads cost effectively for many applications in all industries. The prerequisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature. 
Orion Fans - Sealed Sleeve FansOrion Fans, a division of Knight Electronics has developed a new family of sealed sleeve bearing DC fans. The Challenger Series fans feature a unique patented sealed sleeve bearing system that has an exceptionally long life expectancy of more than 50,000 hours at 25°C (L10). MTBF is in excess of 200,000 hours. Laird Technologies Releases Second in Series of Thermal Management Application NotesLaird Technologies has announced the release of its latest application note entitled "Thermoelectrics vs. Compressors in Climate-Controlled Electronic Enclosures". This application note is the second in a series of notes describing the role of Thermal Management in numerous market segments. 
RS upgrades Thermal Management rangeRS Components has announced a further expansion of its range of Thermal Management products with the addition of the latest new technology fans and fan controllers from ebm-papst. 
Sexton takes over as fan business manager at AercoAerco has appointed Roy Sexton as fan business manager to replace Robin Cook who has retired after 40 years in the electronics distribution business. Robin was formerly a director of Fan Technology, a company that was acquired by Aerco in 2000. Laird Technologies Releases First in a Series of Thermal Management Application NotesLaird Technologies today announced the release of its new application note titled "Thermoelectric Assemblies for Medical Applications". This application note is the first in a series of notes describing the role of Thermal Management in numerous market segments. 
Sunon Super Silence Fan Series – unheard sound qualitySunon's long term objective has been the design and manufacture of a fan with optimal acoustic performance in an application or environment where silence is required. To do this they analysed response of the human ear to certain sounds using a Head Measurement System (HMS) from Germany's Head Acoustics Company and 24-bit digital processing technology. 
Orion Fans Develops Program to Support New and Existing Customers' NeedsOrion Fans, a division of Knight Electronics and a leading manufacturer of standard and custom AC and DC fans, has developed a three-point program to support both new and existing customers' cooling needs. Maintaining the largest available inventory of AC and DC fans and fan trays in the world, one of the industry's shortest lead times, and an extensive product line that crosses to all major competitors' product offerings, Orion Fans offers customers a readily available source for new and drop-in replacement cooling solutions. 
Rittal Cooling units offer up to 45% more efficiency than conventional coolingRittal's new cool efficiency cooling units are now up to 45% more economical than conventional units of the same output in both running costs as well as CO2 emissions. The units have been developed using the latest EC fan technology and incorporate both RiNano and condensate management as standard. The new efficiency label from Rittal in accordance with DIN EN ISO 14021 identifies all cooling systems that make a significant contribution to environmental protection. These new cooling systems far exceed the requirements of DIN 3168 and meet all three requirements of the new efficiency label. Nextreme And Lockheed Martin Agree To Develop Next Generation Thermal And Power Management SolutionsNextreme Thermal Solutions, the leader in microscale thermal and power management products for the electronics industry, and Lockheed Martin have entered into a cooperation agreement to develop new products based on Nextreme's thin-film thermoelectric materials. The agreement allows Lockheed Martin to use Nextreme's thin-film thermoelectric products and thermal and power management design services in solutions it is developing for government and civil applications. Laird Technologies Introduces Newly Modified Air-to-Air Outdoor Thermoelectric Cooler AssembliesLaird Technologies, Inc today announced the introduction of its newly modified Air-to-Air Outdoor Thermoelectric Cooler Assemblies. This series was modified to expand the number of outdoor applications, particularly telecom battery back-up systems and electronic integration enclosures that require cooling in harsh environments. Products in this series include the AA-100, AA-150, and AA-200. 
Evaluation Kit Demonstrates The Power Of Thermoelectric CoolingNextreme Thermal Solutions has developed an easy-to-use, self-contained platform for conducting desktop demonstrations of its thermoelectric cooling technology. The eTEC Thermoelectric Cooling Evaluation Kit contains a single UPF40 thermoelectric module, an air-tight cooling environment and electrical connections to make precise temperature measurements of the thin-film thermoelectric device. 
Softer option for Bergquist's high-conductivity Gap PadsBergquist has extended its family of S-class low-modulus gap pad materials optimised for high thermal performance by introducing Gap Pad 1500S30, which achieves thermal conductivity 1.3W/m-K and bulk-hardness rating 30 (Shore 00). The new formulation increases choice for designers seeking efficient heat removal from fragile components in cost-sensitive applications. 
Mounting Tape Said To Give Three Times the Thermal Conductivity of Competing TapesMH&W International has introduced Keratherm KL 90 highly thermally conductive, double-sided adhesive tape which provides 1.4 W/mK of thermal conductivity – said to be three times higher than other thermal tapes – for more effective heat transfer from hot components to heat sinks. The new tape's thermal impedance is just 208°C-mm2/W (0.32°K-in2/W). Aavid Thermalloy to Globally Distribute Heat Sink and Attachment ProductsAavid Thermalloy has signed a distribution agreement with Advanced Thermal Solutions, Inc., a leader in innovative component cooling solutions. Aavid Thermalloy, with its global customer base and broad network of sales offices, representatives and distributors, will now have access to ATS' high performance heat sink and attachment technologies to address the cooling of today's and tomorrow's electronic devices. 
New heatsink design from OhmiteAware that thermal management is an important part of environmental care, and that anything which doesn't require the use of electricity in order to maintain acceptable temperatures, is likely to be welcomed by design engineers, Ohmite has launched the first of a range of heatsinks which not only meet these requirements, but also save time and money. 
High Performance DC Fan Series with Increased AirflowOrion Fans, a leading manufacturer of standard and custom AC and DC fans, fan trays and accessories, has developed a new series of application-specific high performance DC fans. The VA Series fans include the most popular frame sizes: 120x38 mm, 92x38mm, 80x38mm and 60x38mm. These models feature exceptional airflow in applications with extremely high static pressure. 
Clip-On Heat Sink Assembly Improves Thermal PeformanceAdvanced Thermal Solutions has announced the introduction of superGRIP, a new two-component, attachment system which quickly and securely mounts heat sinks to a wide range of hot running Ball Grid Array (BGA) components, while using a minimal amount of space on the PCB and eliminating the need to drill holes. 
Ceramic Heat-Sink from WTSCeramCool is said to be the ideal base for the thermal management of high power electronic systems. CeramCool is available from ceramic materials such as Rubalit 708, Alunit and other materials upon request. New blade design creates ‘green’ fan from AercoNew from Aerco is a range of fans from Delta that uses a highly efficient, dual blade design with improved aerodynamics that avoids air flow separation and results in a more efficient performance thus saving energy while reducing operating noise levels. 
New ADDA DC fan from Aerco delivers 36% more airNew from Aerco is the AD0824XB, a new 24VDC, 80mm equipment fan from ADDA that delivers an airflow of 30 litres/sec (67CFM) a figure that is 36% higher against a system pressure of 25% greater than its equivalent fan in the previous ADDA range. Aerco sets up new marketing initiative with leading equipment fan supplierAerco has become the first European stocking distributor for Delta. Delta has gained industry recognition as a manufacturer of DC fans and blowers covering axial fans from 25mm-200mm, blowers from 30mm-250mm, cross-flow fans and slim blowers. Delta fans employ a combination of a highly-distinctive, patented blade design, innovative structure design and 'Sensflow' control to provide the best possible cooling solutions. 
Thermal Management Solutions from HawcoAvailable from specialist controls and automation components supplier, Hawco, new safety and thermal management solutions provide protection from, and control over temperature, current and voltage. Hawco aims to supply the highest quality and most advanced thermal cutouts, thermostats, thermal fuses and thermistors to all sectors of industry. 
New high-performance DC fan from AercoA new 12VDC, 60mm fan from ADDA available in the UK from Aerco has, thanks to a combination of improved venturi design and a higher specification motor, an airflow capacity of 12.5% greater than its predecessor against 20% higher system pressure. Thermal management product range includes high performance insulatorsRapid Electronics has expanded its stock of Bergquist thermal management products to include high performance insulators, adhesives, gap filling and interface materials. With over 40 years experience, Bergquist are market-leading manufacturers of products that manage heat in electronic circuits, particularly around semiconductors. Whether at the design stage or at full production thermal interface materials are required for heat reduction and insulation purposes, to eliminate air gaps between heat sinks and bare-leaded, high voltage devices, and to act as electric isolators. 
DC fan from Aerco delivers more airflowNew from Aerco is the AD0412XB, one of a new range of DC equipment fans from ADDA that delivers 25% more airflow than its predecessor. Most importantly, this airflow of 4.18 litres/sec (8.9CFM) from the 40mm x 40mm x 10mm fan is achieved against almost double the system pressure making it ideal for modern, densely packaged enclosures where high pressures have to be overcome. This increase in performance is due to a combination of improved venturi design and the use of a higher specification motor. 
Standard and Custom Seifert heatsinks from Live ElectronicsSchaffner UK's Seifert heatsinks are now available from specialist electronics distributor Live Electronics. A huge range of standard components are available, but custom heatsinks can also be quickly and cost-effectively manufactured to suit individual applications. 
High-power High-capacity FanThe ETRI 97CJ, available in the UK from Aerco, is a high-power, high-capacity fan that measures 350mm in diameter, is 454mm deep and is ideal for use in military equipment and heavy-duty industrial applications. 
Schaffner Add Heat Sinks To Product RangeSchaffner Ltd, a leader in EMC filters and electromagnetic compatibility, has announced the addition of the Seifert Electronics range of high efficiency heat sinks to its product range. Established in 1965 Seifert Electronics offer standard and custom solutions for cooling components and modules. The product range encompasses single component PCB mounted heat sinks through to high-performance, fan cooled heat sink assemblies and liquid coolers. Manufacture takes place in their own 4,500m² DIN EN 9001:2001 certified facilities. DC fan designed for high cooling applicationsA new high performance ADDA DC fan from Aerco has been produced in the larger frame size of 127 x 127 x 38mm to meet the high cooling requirements of modern computer server equipment and other high density equipment cabinets. 
ADDA fan designed for demanding cooling applicationsNow available in the UK from Aerco is a range of DC fans from ADDA built in a 70 x70 x 38mm frame size. Previously, this range of fans was only available in a maximum thickness of 25mm and the new size results in over 50% increase in airflow, making the AD0712UB ideal for demanding cooling applications. 
High performance DC axial fan from AercoNew from Aerco is the ADDA 1224HB, a high-performance DC axial fan that is one of a new generation of ADDA DC fans that shows a marked improvement in performance over its predecessor. Built in a 120 x 120 x 38mm frame size this 24V fan operates from a supply voltage of between 17 and 26.4VDC, this fan produces airflow of 94.4 litres/sec (200 CFM) in free air at nominal voltage and a maximum static pressure of 16mm H2O at zero air flow. Catalogue Features 380+ Heat Sinks Available in 24 HoursOver 380 heat sinks, available for overnight delivery exclusively from Digi-Key, are included in Advanced Thermal Solutions, Inc's (ATS) new Heat Sink Catalogue. Each of the heat sinks within the catalogue is listed with part numbers, dimensions, thermal performance data and pricing. 
STEADLANDS INTRODUCE THERMAL TRANSFER COMPOUND TO THEIRSteadlands International have extended their thermal management range, which already includes heatsinks, power resistors, thermoelectric coolers and thermo generating modules, with the addition of a new thermal transfer compound. 
Digi-Key and Advanced Thermal Solutions Sign Worldwide Distribution AgreementAdvanced Thermal Solutions, Inc. (ATS) has partnered with Digi-Key, the global electronic components distributor, to offer over 380 heat sinks for cooling BGAs and other hot-running semiconductor devices. The heat sinks are available for immediate delivery when purchased through Digi-Key's Web site and printed catalogs. Design engineers can obtain individual ATS sinks for prototypes and testing, or larger volumes for production requirements. Digi-Key's online tools allow customers to check real-time inventory and order parts 24 hours per day, every day of the year. 
Complete thermal management systems from one sourceSpecialist distributor Switchtec has launched a range of thermal control devices comprising combined fan/filter units and axial fans for OEM use. Aimed at those manufacturing control panels, the units will find favour with equipment manufacturers and panel builders seeking a one stop shop for this equipment. Control panel manufacturers are increasingly under pressure to develop smaller panels, and at the same time to fit more and more heat generating electronic equipment into smaller, confined spaces. As a result, heat build up often becomes a problem and manufacturers require methods of efficiently ventilating their control panels. 
High performance flat pack fanRittal's RiCool III flat pack fan, is a third generation high-capacity direct current fan which has a maximum capacity of 320 m3/h (unimpeded airflow, RiCool II: 275 m3/h) and 71 mm H20 static pressure, which can dissipate high heat losses, such as those found in AdvancedTCA applications. Requiring just 1 U of installation space, RiCool III is integrated as standard in Rittal's AdvancedTCA shelves. 
142-page enclosure thermal management catalogue includes many new productsPfannenberg has published a new 142 page comprehensive catalogue which gives full performance details, mechanical, electrical and environmental specifications for its comprehensive range of thermal management products for use in indoor and outdoor electrical and electronic cabinets. 
DC fan said to outperform predecessor by 70%Now available in the UK from Aerco, the AD912VB is a 92x92x38mm fan from ADDA that is said to set new standards of airflow performance - nearly 70% greater than previous models. New motor and bearing technology in this 12V fan allows the blade to be run at 6,000rev/min and still provide a lifetime of 50,000 hours at 40ºC. 
DC fans provide greater airflowThe ADDA GP Series, available exclusively in the UK from Aerco use an improved venturi design that provides smoother airflow and a motor technology that allows speed of up to 4,700rev/min. Fans in the 120 x 120 x 38mm frame size are said by Aerco to provide an airflow of over 80% greater than the previous models of a similar size and type. 
Filterfans give much increased airflow in IP55 environmentsThe latest fourth generation of Pfannenberg's Filterfan, with free airflows ranging from 25 m3/h to 925 m3/h, is the latest update to a concept originally invented by the company as long ago as 1958. Uniquely in this market, the new design uses a pleated fabric filter and a sophisticated louvre profile to give a significantly higher airflow at IP55 than was achieved by the previous version at IP54; filter life is also three times longer. The unique, patented water and dust pre-separation in the lamellas ensures that the great majority of water and dust never reach the filter mat, extending its lifetime and therefore reducing the maintenance requirements. The Click and Fit design eliminates the need for fixings, providing hardware-free installation and filter mat changing, giving a unique user-friendly product. 
AC axial fans from AercoThe AA155 series of low cost, AC axial fans from ADDA, available exclusively in the UK from Aerco, has a circular frame of 155mm diameter and 55mm thick and generates airflow of 102 litre/sec (216CFM) making it ideal for cabinets and enclosures that require high levels of heat dissipation. ADDA extends range of large AC axial fansThe ADDA range of large axial AC fans, available exclusively in the UK from Aerco, has been extended to include the AK series built in a 254 x 89mm frame size. Capable of providing airflow up to 432 litre/sec (915 CFM), this high powered cooler will be ideal for applications that require high levels of heat dissipation such as large electronic enclosures and refrigeration units. World’s smallest DC equipment fan available in UK from AercoNow available from Aerco is a tiny DC fan from ADDA that the manufacturer believes to be the world's smallest DC equipment fan. 
LAIRD TECHNOLOGIES INTRODUCES THERMALLY ENHANCED BOARD LEVEL SHIELDING SOLUTION FOR HEAT REMOVALLaird Technologies, a leading designer and manufacturer of antenna, electromagnetic interference (EMI) shielding, telematics and thermal management solutions, introduced today its Thermally Enhanced Board Level Shielding technology (T-BLS), a RoHS compliant cooling method for electronic devices where board level shielding is required. 
New sleeve bearing system from Jamicon improves temperature range and product life while reducing costJamicon DC fans from Aerco are now available with a new bearing system that is far less expensive than ball bearings, provides longer life than sleeve bearings and is quieter than ball and sleeve combinations. 
Metal bladed fans beat tough environmentsDesigned for harsh, rugged environments, the new Orion 120mm AC fan with metal blades from Solid State Supplies is an economical cooling solution ideally suited to military, chemical, process control and industrial applications. 
New high performance large frame AC fansAvailable in the UK from Aerco are new ADDA AC fans that are built in larger frame sizes than have previously been available from the company and, because they use a new, high performance, capacitor motor, provide the cooling capacity that makes them ideal for large industrial cabinets and the refrigeration industry. 
Cooling fans with IntelligenceMany of the fans in Aerco's extensive range can be supplied with multi-function signals and controls to provide system protection and intelligent cooling control. With modern, complex assemblies the cost of system failure is greater than ever before and, in applications where the system load changes dramatically, an intelligent cooling approach where the fan speed is adjusted to maintain the enclosure at the optimum temperature at all times is often required. 
50mm square blower moves a lot of airDesigned to keep the air moving in a confined space, the new ODB5009 blower from Solid State Supplies is only 50mm square and 9mm deep yet moves three cubic feet of air per minute. Designed to provide directional airflow, the device is ideally suited to spot cooling applications. 
IP rated AC fans from AercoAerco now supplies from stock a range of AC fans meeting IP ratings up to IP54 that complement the IP rated DC fans that are also stocked at Horsham. 
Fan allows users to select airflowThe Etri 341DY DC axial fan, available in the UK from Aerco, is supplied in four performance versions with airflow capacity ranging from 33.8 litres/sec (71.7 CFM) to 52.0 litres/sec (110.2 CFM) so that a fan can be selected to best suit a wide range of applications. |
Headlines
 |
