Powersolve adds LPS250 and LPQ250 to its AC/DC converters offering

10th November 2006
News Release from: Powersolve
Written by : ES Admin
 Powersolve adds LPS250 and LPQ250 to its AC/DC converters offering
Powersolve has added to its wide-ranging AC/DC converters offering with the addition of the LPS250 and LPQ250 Series, both of which can be specified with end or top fan covers. With either fan cover, both will give up to 250W whilst the power supply is also available without a fan for requirements where external fan cooling is provided. Four single output models are available with very wide output adjustment enabling any voltage between 3V and 48V to be selected.
There are two quad output versions with either 5V & +/-12V or 5V & +/-15V with a fourth floating and adjustable output of 5V-25V DC.

Both series offer active power factor correction, compliance with EN61000-3-2 and an integral EMI filter. As well as meeting all relevant international safety standards, both also offer a wide range of output voltages from an input range of between 85 to 264VAC. Two supervisory outputs of +5V and +12V are also incorporated.

The power supplies also feature Power Fail & DC OK signals, Remote Sense and Remote On/Off. All models are fully overload, overvoltage and overtemperature protected. MTBF is calculated at more than 550,000 hours at full load and operating temperature range is from 0 to 50ºC.






You must be logged in to comment

Write a comment

No comments




Network Headlines

The source for EOL devices

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer