Test & Measurement

Data acquisition system works with handheld mobiles

26th January 2015
Mick Elliott
0

The SMARTDAC+ GM data acquisition system from Yokogawa Electric improves operational efficiency due to its modular design, which facilitates the mounting and removal of modules. In addition, the system supports Bluetooth wireless communications for use with handheld mobile devices. It is expected to comply with 21 CFR Part 11 regulations in 2015.

Historically, many data acquisition systems were equipped with a base plate for the mounting of modules. Base plates are now less common, as users prefer designs that allow the easy mounting and removal of modules. The data acquisition systems in use today can be classified into two types: those that are equipped with a monitor, and those that are not. In the latter case, the systems must be hooked up to a PC and operated using its screen and keyboard.

To meet the needs of its customers, Yokogawa developed the SMARTDAC+ GM modular data acquisition system. With modular I/O, users can scale their data acquisition system based on their process requirement, with the ability to upgrade as their needs evolve. In addition, wireless Bluetooth connection allows wireless communication with mobile devices.

Enhancements incorporated in the SMARTDAC+ GM data acquisition system include the following:

Yokogawa has developed a new module base that eliminates the need for a base plate and enables the mounting and dismounting of single modules. With earlier non-base-plate designs, modules were connected in a row. To dismount a module in the centre of the row, users would have to disconnect all the modules to the left or the right. The SMARTDAC+ GM system's modular design uses interconnected module bases. To replace a module, users only need to pull out the module from the module base and insert another. This greatly improves efficiency. The module bases can be easily secured to each other with a sliding lock. When the system is used in a set configuration for longer periods of time, the module bases can be fastened together with screws.

The SMARTDAC+ GM system supports Bluetooth connectivity to tablets running the Android OS. From a handheld device, users can wirelessly monitor and operate the system and perform settings other than those done at initial system setup, which requires the use of a PC and an Ethernet or USB connection. An Android tablet can be used to start or stop data acquisition, change settings, or monitor acquired process values.

The SMARTDAC+ GM system can be connected with an Ethernet cable to a Yokogawa WT300/500/1800 power analyser, which is used to perform the simultaneous measurements of temperature and power that are often required to test the performance of devices such as home appliances. The digital transfer of measurement data to this system enables the highly accurate acquisition of measurement data.

Main target markets include company R&D units engaged in the development of home appliances, automobiles, semiconductors and new energy applications; universities; research institutes; laboratories; and manufacturing operations in industries such as iron and steel, petrochemicals, chemicals, pulp and paper, food and beverages, pharmaceuticals, water and wastewater, electrical equipment, and electronics.

Applications include acquisition and recording of data such as temperature, voltage, current, flow rate, and pressure for the evaluation testing of products, monitoring of plant equipment, and environmental monitoring.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier