750W-1500W power ranges added to DC electronic loads

30th September 2015
Posted By : Mick Elliott
750W-1500W power ranges added to DC electronic loads

Four new programmable DC electronic load models, the 8610, 8612, 8614, and 8616 have been added to B&K Precision’s 8600 Series. With operating voltage ranges up to 500V, the new models bring to the series a significant increase in power range from 250W to 1500W and a new offering capable of sinking up to 240A for high current applications.

All models provide adjustable current slew rate, fast transient operation speeds up to 25kHz, and built-in battery and LED test mode functions, making these high-performance DC loads suitable for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, LED drivers, and photovoltaic arrays.

Similar to the previously released 8600, 8601, and 8602, the new models can operate in constant voltage (CV), constant current (CC), constant resistance (CR), and constant power (CW) modes. In addition, the expanded units continue to provide transient, list, and automatic test functions for more complex loading profiles of varying load levels, switching times, and operation modes.

The high resolution 16-bit measurement system carries over to the new models, offering a dual-line display for users to view both measured and set parameters simultaneously. Users can also adjust current slew rates, measure voltage rise and fall times, and control the voltage turn-on state to start and stop discharging of a power source at a specified voltage level.

All new models arrive in a 19in rack mountable form factor and provide main input terminals on the rear. An additional I/O terminal is offered for external triggering, input On/Off control, voltage fault monitoring, remote sense, and external analog current control and monitoring. A current monitor BNC output is also available for continuous monitoring of the DC loads' input current level. 

For remote control and programming, the instruments offer standard GPIB, USB (USBTMC-compliant), and RS232 interfaces supporting SCPI commands. LabVIEW drivers are provided along with free application software for front panel emulation, generation and execution of test sequences, and logging measurements via a PC.

To prevent damage to the unit and device under test, each model offers the following protection modes: overvoltage (OVP), overcurrent (OCP), overpower (OPP), overtemperature (OTP), and local/remote reverse voltage (LRV/RRV) protection.

Available immediately, B&K Precision's 8610, 8612, 8614, and 8616 programmable DC electronic loads are all backed by a standard 3-year warranty

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
HETT 2019
1st October 2019
United Kingdom EXCEL, London
World Summit AI 2019
9th October 2019
Netherlands Taets Park, Amsterdam
New Scientist Live 2019
10th October 2019
United Kingdom ExCeL, London
GIANT Health Event 2019
15th October 2019
United Kingdom Chelsea Football Club Stadium, London