Test & Measurement

AWGs enable signal generation in remote applications

29th July 2016
Mick Elliott
0

A new line of arbitrary waveform generators (AWGs) based on the LXI instrumentation standard has been unveiled by Spectrum Instrumentation. The company says that it opens new doors for engineers and scientists who need to generate electronic signals in automated test and remote applications. The new generatorNETBOX series features seven new models to give users a wide choice of performance levels.

The instruments combine the latest digital-to-analogue converter (DAC) technology and can generate signals from DC up to 400MHz in frequency. Full remote control is achieved through a simple Ethernet connection to any PC or local area network (LAN) for easy integration into any test system.

The generatorNETBOX series is available with two, four or eight fully synchronous channels. For high frequency applications, the fast, high-resolution DN2.66x AWGs use DACs with 16 bit vertical resolution and offer output rates up to either 1.25 GS/s or 625 MS/s.

They also include large on-board memories (up to 2 x 4GB) and a generous output voltage range of up to ±4V (±5V for 625MS/s models) into high impedance and ±2 V (±2.5V for 625MS/s models) into 50O.

For lower frequency applications, Spectrum offers the cost-effective DN2.60x AWGs, which utilise 14-bit DAC technology that can output signals at rates up to 125MS/s. These instruments are ideal for applications where signals with frequency content up to 60 MHz need to be produced.

To allow the generation of long and complex waveforms, the AWGs combine their large on-board memories (2 GSamples for DN2.66x series and 512 MSamples for DN2.60x series) with a number of operating modes such as single-shot, loop, FIFO, gating and sequence replay.

In FIFO mode, the instruments can stream data continuously from PC memory to the AWG memory over the GBit Ethernet port. The AWGs can even output signals while new waveform data is being sent to the on-board memory.

The instruments combine the latest digital-to-analogue converter (DAC) technology and can generate signals from DC up to 400MHz in frequency. Full remote control is achieved through a simple Ethernet connection to any PC or local area network (LAN) for easy integration into any test system.

The generatorNETBOX series is available with two, four or eight fully synchronous channels. For high frequency applications, the fast, high-resolution DN2.66x AWGs use DACs with 16-bit vertical resolution and offer output rates up to either 1.25 GS/s or 625 MS/s.

They also include large on-board memories (up to 2 x 4GB) and a generous output voltage range of up to ±4V (±5V for 625MS/s models) into high impedance and ±2 V (±2.5V for 625MS/s models) into 50O.

For lower frequency applications, Spectrum offers the cost-effective DN2.60x AWGs, which utilise 14-bit DAC technology that can output signals at rates up to 125MS/s. These instruments are ideal for applications where signals with frequency content up to 60 MHz need to be produced.

To allow the generation of long and complex waveforms, the AWGs combine their large on-board memories (2 GSamples for DN2.66x series and 512 MSamples for DN2.60x series) with a number of operating modes such as single-shot, loop, FIFO, gating and sequence replay.

In FIFO mode, the instruments can stream data continuously from PC memory to the AWG memory over the GBit Ethernet port. The AWGs can even output signals while new waveform data is being sent to the on-board memory.

Each channel is clocked using a precision phase locked loop (PLL) control system generated internally or from an external clock or reference.

Front-panel multi-purpose I/O connectors enhance system flexibility by allowing access to asynchronous digital inputs, asynchronous digital outputs, the trigger output, the run and arm status, the PLL reference clock and a marker output.

Small and compact, the generatorNETBOX products can benchtop or rack mounted. For mobile applications they can also be powered by an optional 12 or 24 VDC source.

The instruments are fully self-contained and come with all the tools necessary to generate an almost unlimited variety of waveforms. Simply connect the unit to a host computer (i.e. laptop or workstation) or anywhere on the corporate network.

Spectrum's SBench6-Pro software, which comes standard with every unit, provides a simple, easy-to-use, graphical user interface to control all the operating modes and hardware settings.

The software's built-in features for waveform creation, data analysis and documentation include the EasyGenerator function for producing standard wave shapes such as sine, rectangular, triangle, saw-tooth, SINC and DC.

Waveforms can also be created from equations or imported from other devices, such as digitisers and oscilloscopes, or other software programs. SBench6 allows data import and export in the most popular formats, such as ASCII, binary and WAV.

Included drivers allow users to write their own control programs with almost any popular programming language, such as C++, Visual Basic, VB.NET, C#, J#, Delphi and Python code. Third party software support is also provided for LabVIEW, LabWindows and MatLab.

Using Spectrum's embedded server option, DN2.xxx-Emb, a generatorNETBOX can operate remotely as an independent unit or as part of a larger system when connected to a LAN.

A powerful CPU, a freely accessible SSD, more memory and a remote software development access method combine to create an open platform where users can run their own software, while at the same time remain connected via LAN for remote access.

The generatorNETBOX products are available now.

All units are shipped factory tested and include Spectrum's SBench 6 Professional version software, support drivers for most popular programming languages and a two year manufacturer's warranty.

Technical support, including software and firmware updates, is available free of charge.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier